Wärmegedämmte Haustüren der ECO-Serie aus Stahl

<div class="doorhan-section-content">
  <h2>Haustüren der Serie ECO – Wirtschaftliche und langlebige Stahltüren</h2>
  <p>Die Haustüren der Baureihe ECO von DoorHan stellen eine besonders wirtschaftliche Lösung für Bauherren und Renovierer dar. Sie eignen sich hervorragend als funktionale Hauseingangstüren, Nebeneingangstüren, Kelleraußentüren oder Zugänge zu Garagen und Nebengebäuden.</p>
  <p>Das Türblatt aus feuerverzinktem Stahlblech ist verwindungssteif konstruiert und mit einem isolierenden Hartschaumkern gefüllt. Diese Bauweise schützt vor Auskühlung und reduziert den Energiebedarf des Gebäudes. Die werkseitig grundierte und beschichtete Oberfläche ist schlagfest und pflegeleicht.</p>
  <p>Im Lieferumfang ist eine passende Stahlzarge mit umlaufendem Dichtungsprofil enthalten, die einen schnellen Einbau in Mauerwerks- oder Betonöffnungen erlaubt.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Für welche Einsatzbereiche ist die ECO-Serie konzipiert?</h4>
      <p>Sie eignet sich ideal für Nebeneingänge, Gartenzugänge, Kellertüren sowie für preisbewusste Wohnungsbauprojekte.</p>
    </div>
    <div class="faq-item">
      <h4>Wird die Tür komplett mit Zarge geliefert?</h4>
      <p>Ja, ECO-Türen werden als einbaufertiges Set bestehend aus Türblatt, Zarge, Dichtung und Drückergarnitur geliefert.</p>
    </div>
  </section>
</div>

Application:

Entrance door inside the premises

Order with installation

Advantages

Cost effective solution

Household doors "ECO" are used as apartment doors in residential complexes.

Resistant to corrosion

High-strength 60mm sandwich panel and cold-rolled galvanized steel frame provide high corrosion resistance.

High strength of the door leaf

Hollow-free filling with non-combustible high-density mineral wool board 130 kg/m³ ensures strength and reliability of the door leaf.

Cost effective solution

Household doors "ECO" are used as apartment doors in residential complexes.

Resistant to corrosion

High-strength 60mm sandwich panel and cold-rolled galvanized steel frame provide high corrosion resistance.

High strength of the door leaf

Hollow-free filling with non-combustible high-density mineral wool board 130 kg/m³ ensures strength and reliability of the door leaf.

Design

The front design of the canvas

The back design of the canvas

Anti-vandal powder coating in antique copper color

Anti-vandal powder coating in antique silver

Decorative imprint "symmetry"

Anti-vandal powder coating in antique copper color

Anti-vandal powder coating in antique silver

Canvas design "symmetry"

Equipment

Standard

Lock set for cylinder PRO-SAM 3V 4-31/55 RF55-002.U4

Cylinder mechanism made of aluminum "revolving key" with 5 keys included

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

900/1000

Opening height, mm

2070

Anti-removable pins
Steel hinges
Door canvas
Filling and insulation
Peephole with 180° viewing angle
Set of spring-loaded handles on the bar
Mechanical single system lock
Cylinder mechanism "key-turntable"
Powder coating
Door frame
Steel threshold

High strength galvanized cold rolled steel sheet with high density mineral wool core. The platband allows you to hide the irregularities of the construction opening.

Galvanized steel frame made of 1.5 mm solid profile. Wide C-shaped casing 55 mm wide.

Adjustable galvanized steel hinges with anti-removal pins protect against removal from the hinges and provide a door opening angle of more than 180°.

Parameter	Value	Notes
Number of cycles	500000
Force of manual opening and closing, N	No more than 72/150
Noise insulation, dB	33
Strength of fastening of handles to a cloth, H	1000
Thermal resistance, m² · °С/W	1,1

The door can be operated in an industrial atmosphere, in areas with a temperate and cold climate, in closed heated and ventilated rooms at an ambient temperature of -25 to +40 °C with a relative humidity of up to 80%.

In case of operation of the door from the side of the street, installation should be carried out in a cold vestibule to prevent possible formation of condensate on the surface and, as a result, deformation of finishing materials.

To avoid fading of the cover of the door unit, installation should be carried out using a protective visor, which will prevent sunlight and precipitation from entering the surface of the door unit.

It is not allowed to close the door leaf with the extended bolts of the locks or the latch. This can lead to failure of the lock mechanisms and deformation of the crossbars.

It is not allowed to get foreign objects into the openings of the door frame, as well as between the frame and the door leaf. It is recommended to cover the door with protective materials during the period of repair and construction work.

It is forbidden to install additional equipment or accessories, as well as to independently replace or adjust individual parts, without consulting the manufacturer.

The maintenance of decorative panels is carried out in accordance with the requirements for the care of furniture and wooden products. Do not use cleaning agents, aggressive liquids, solvents or abrasives.

If the door systems are used for other purposes, the manufacturer is not responsible for their integrity and correct operation.

It is recommended to lubricate the hinge assembly with a thin layer of grease every 6 months.

Packing in bubble wrap	Packaging features
Contents	Bubble wrap, cardboard corner, stretch film
Description	It is a door block wrapped with bubble wrap; in the corners there is a cardboard corner, which ensures the safety of the canvas during transportation, wrapped with stretch film
Height, mm	80
Length, mm	2100
Width, mm	900/1000

Packing on pallet	Packaging features
Contents	Pallet, stretch film, cardboard corner
Description	Packed doors are stacked vertically on a pallet; a cardboard corner is installed in the corners, designed to save the doors during transportation; then wrapped with stretch film
Number of items in the packaging	23

Additional Information print

The door can be transported in the manufacturer's packaging both vertically and horizontally by all types of covered transport or in containers.

During transportation and storage of doors, measures must be taken to protect them from mechanical damage, violations of the factory packaging, pollution, and exposure to atmospheric precipitation.

Installation

Mounting Options

Checking Dimensional Details

The door frame for surface mounting is the most popular. The platband of the box simultaneously performs two functions: it covers the mounting gap and performs a decorative function.

The door frame of internal opening is installed where there are requirements for evacuation or it is necessary to open the door into the room.

The door frame for mortise mounting allows you to install the door both with opening to the inside and outside of the room, and also makes it possible to install the door on the object without a wall.

Disassemble the old door and make sure the opening is ready for mounting the door. If the opening is not ready (there are fixing rods, anchor bolts, surface roughness in the form of sagging from plaster, wooden bars from fastening the old door, etc.), then they must be removed. Also, the opening may require additional processing: expansion or narrowing with the help of additional tools (grinder, level) or materials (brick, foam block, metal profile, etc.).
The prepared opening should have a rectangular shape. The wall thickness must be at least 150 mm. The walls should be even and smooth, without sagging plaster and cracks. The deviation of the working surfaces from the vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm. Diagonal difference is not more than 5 mm. The opening must have sufficient strength and not contain voids.

Warranty print

9. We undertake, at our option, to remedy the identified defects, to replace the defective product with a non-defective product, or to reimburse the costs of acquiring the defective product. We do not cover the costs of dismantling and assembling the door, as well as transport costs, except in cases specifically stipulated in the sales contract.

Design

The front design of the canvas

Anti-vandal powder coating in antique copper color

Anti-vandal powder coating in antique silver

Decorative imprint "symmetry"

The back design of the canvas

Anti-vandal powder coating in antique copper color

Anti-vandal powder coating in antique silver

Canvas design "symmetry"

Equipment

Standard

Lock set for cylinder PRO-SAM 3V 4-31/55 RF55-002.U4

Cylinder mechanism made of aluminum "revolving key" with 5 keys included

Technical description

Size Table

Parameters

Value

Opening width, mm

900/1000

Opening height, mm

2070

Construction

Anti-removable pins
Steel hinges
Door canvas
Filling and insulation
Peephole with 180° viewing angle
Set of spring-loaded handles on the bar
Mechanical single system lock
Cylinder mechanism "key-turntable"
Powder coating
Door frame
Steel threshold

Standard Construction

High strength galvanized cold rolled steel sheet with high density mineral wool core. The platband allows you to hide the irregularities of the construction opening.

Galvanized steel frame made of 1.5 mm solid profile. Wide C-shaped casing 55 mm wide.

Adjustable galvanized steel hinges with anti-removal pins protect against removal from the hinges and provide a door opening angle of more than 180°.

Specifications

Parameter	Value	Notes
Number of cycles	500000
Force of manual opening and closing, N	No more than 72/150
Noise insulation, dB	33
Strength of fastening of handles to a cloth, H	1000
Thermal resistance, m² · °С/W	1,1

Operating Conditions

To avoid fading of the cover of the door unit, installation should be carried out using a protective visor, which will prevent sunlight and precipitation from entering the surface of the door unit.

It is not allowed to close the door leaf with the extended bolts of the locks or the latch. This can lead to failure of the lock mechanisms and deformation of the crossbars.

It is forbidden to install additional equipment or accessories, as well as to independently replace or adjust individual parts, without consulting the manufacturer.

If the door systems are used for other purposes, the manufacturer is not responsible for their integrity and correct operation.

It is recommended to lubricate the hinge assembly with a thin layer of grease every 6 months.

Packaging

Packing in bubble wrap	Packaging features
Contents	Bubble wrap, cardboard corner, stretch film
Description	It is a door block wrapped with bubble wrap; in the corners there is a cardboard corner, which ensures the safety of the canvas during transportation, wrapped with stretch film
Height, mm	80
Length, mm	2100
Width, mm	900/1000

Packing on pallet	Packaging features
Contents	Pallet, stretch film, cardboard corner
Description	Packed doors are stacked vertically on a pallet; a cardboard corner is installed in the corners, designed to save the doors during transportation; then wrapped with stretch film
Number of items in the packaging	23

Additional Information

The door can be transported in the manufacturer's packaging both vertically and horizontally by all types of covered transport or in containers.

During transportation and storage of doors, measures must be taken to protect them from mechanical damage, violations of the factory packaging, pollution, and exposure to atmospheric precipitation.

Installation

Mounting Options

The door frame for surface mounting is the most popular. The platband of the box simultaneously performs two functions: it covers the mounting gap and performs a decorative function.

The door frame of internal opening is installed where there are requirements for evacuation or it is necessary to open the door into the room.

Checking Dimensional Details

Disassemble the old door and make sure the opening is ready for mounting the door. If the opening is not ready (there are fixing rods, anchor bolts, surface roughness in the form of sagging from plaster, wooden bars from fastening the old door, etc.), then they must be removed. Also, the opening may require additional processing: expansion or narrowing with the help of additional tools (grinder, level) or materials (brick, foam block, metal profile, etc.).
The prepared opening should have a rectangular shape. The wall thickness must be at least 150 mm. The walls should be even and smooth, without sagging plaster and cracks. The deviation of the working surfaces from the vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm. Diagonal difference is not more than 5 mm. The opening must have sufficient strength and not contain voids.

Warranty

Checkout

Managers of the company will answer all
questions by phone:

+420 702 185 654

CALL BACK