Industrie-Sektionaltore ISD02 | Vollverglast

<div class="doorhan-section-content">
  <h2>Industrie-Sektionaltore ISD02 – Vollverglaste Sektionaltore mit Aluminium-Rahmen</h2>
  <p>Das Industrie-Sektionaltor der Baureihe ISD02 ist für gewerbliche und industrielle Gebäude konzipiert, bei denen ein Einblick in das Gebäudeinnere oder der Durchtritt von Tageslicht gewünscht ist. Typische Einsatzorte sind Werkstätten, Fahrzeughallen, Betriebshöfe und gewerbliche Ausstellungsbereiche. Das Torblatt bewegt sich beim Öffnen senkrecht nach oben und wird entlang der Raumdecke geführt, sodass der Bereich vor der Einfahrt frei und nutzbar bleibt.</p>
  <p>Die Sektionen des Modells ISD02 basieren auf einer Rahmenkonstruktion aus eloxierten Aluminiumprofilen. Anstelle von geschlossenen Stahlblechen werden großflächige Verglasungsfelder eingesetzt, die eine Sichtverbindung zwischen Innen- und Außenbereich ermöglichen. Umlaufende Dichtungen an den Seiten, am Sturz und an der Bodensektion schließen das Torblatt gegenüber dem Mauerwerk ab.</p>
  <p>Für den industriellen Einsatz ist das System mit verstärkten Führungsschienen und stabilen Laufrollen ausgestattet. Das Tor kann manuell oder mit einem elektrischen Industrieantrieb kombiniert werden, um den Öffnungsvorgang in den täglichen Betriebsablauf zu integrieren.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Welche Konstruktion liegt dem Sektionaltor ISD02 zugrunde?</h4>
      <p>Das Torblatt besteht aus Aluminium-Rahmenprofilen, die mit lichtdurchlässigen Füllungen versehen sind, anstelle von geschlossenen Sandwichpaneelen.</p>
    </div>
    <div class="faq-item">
      <h4>Für welche Objekte wird das Modell ISD02 eingesetzt?</h4>
      <p>Das Tor kommt vorwiegend in gewerblichen Hallen, Werkstätten und Fahrzeughallen zum Einsatz, an denen die Sicht nach außen oder innen gewünscht ist.</p>
    </div>
  </section>
</div>

Application:

Automotive showrooms

Fire stations

Order with installation

Design

Panel Type

Surface Type

Full-vision panels

Door panel options

Colour Options

S-line

V-line

W-line

M-line

A-Line

D-Line

Woodgrain

Stucco

Smooth

Full-vision panel with single acrylic glass

Standard glazing

Full-vision glazing

Combined full-vision and sandwich panels

RAL 9016

RAL 9010

RAL 9007

RAL 9006 White aluminium (standard)

RAL 9005

RAL 8017 Chocolate brown (standard)

RAL 8014 Sepia brown (standard)

RAL 7040

RAL 7016 Anthracite grey (standard)

RAL 7016 SANDGRAIN

RAL 6009

RAL 5010

RAL 3000 Flame red (standard)

Custom Ral-colour

DB703

Equipment

Standard

Optional

Full-vision door panel. Unbreakable, impact resistant polycarbonate is used as panel glazing.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

High-quality durable torsion springs designed for 25 000 closing cycles provide effortless closing and opening of the door.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by fixing itself to the track in case of cable failure.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

A set of mounting hardware, instruction manual and product technical data.

Double sided lock blocks the door leaf from inside and outside.

Cath lock blocks the door leaf from inside.

Manual chain operator can be installed to any lift type commercial sectional door and is used for manual opening/closing of the door.

Torsion spring mechanism has a lifetime of 100 000 cycles.

Industrial doors can be equipped with openers and safety devices (go to Sectional Door Automation).

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

2 000–6 000

Opening width, mm

2 000–6 000

Headroom, mm

from 230

Sideroom clearance, mm

from 120

Panoramic panel height, mm

from 370 to 720

Panoramic panel width, mm

not more than 3 000 mm

Vertical track
Vertical angle
Cylindrical shaft
Spring safety device
Drum
U-shaped bracket
Counterbalancing mechanism (torsion spring)
Steel coupler
Internal support bracket
Top support with roller holder
Side support with roller holder
Hinge
Cable break safety device
Bottom profile
Panoramic panel
Bottom seal
Side seal
Top profile
Top seal
Perforated side cap
Full-vision impact-resistant filling
Spring bumper
Universal mounting bracket for horizontal tracks

Low lift, front mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	230: H<3 700
B, mm Opening width	B
A, mm Angle track height	H + 110
Ab, mm Height of shaft axle and drum	≥ A + 59
A1, mm Vertical track height	А - 543
A2, mm Horizontal track height	А - 106
E, mm Horizontal track length	Н + 300
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 185
n, mm Clear opening	H-250 mm (without operator) H-200 mm (with operator)

Low lift drum behind

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	150: H< 3 700
B, mm Opening width	B
A, mm Angle track height	if h < 170: H + 110; if 150 ≤ h ≤170: H + h - 60
Ab, mm Height of shaft axle and drum	if h ≤ 170: H + 55; if 150 ≤ h ≤ 170: H + h - 47
A1, mm Vertical track height	А - 543
A2, mm Horizontal track height	А - 106
E, mm Horizontal track length	Н + 510
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1,185
n, mm Clear opening	H-200 mm (without operator) H-200 mm (with operator)

Standard lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	350: H<3 700 420: 3 700
B, mm Opening width	B
A, mm Angle track height	R381: H + 235; R305: H + 165
Ab, mm Height of shaft axle and drum	A + 97
A1, mm Vertical track height	R381: A — 580; R305: A — 490
A2, mm Horizontal track height	А - 110
E, mm Horizontal track length	R381: H + 200; R305: H + 250
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 060
Q, mm Shaft opener position	300

Standard inclined lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	500
B, mm Opening width	B
A, mm Angle track height	H + 250...985
Ab, mm Height of shaft axle and drum	А + 86/97
A1, mm Vertical track height	Н - 300
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	300

High lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	660
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	by default h — 330
A, mm Angle track height	H + HL
Ab, mm Height of shaft axle and drum	A + 86/97
A1, mm Vertical track height	А - 580
A2, mm Horizontal track height	А - 53
E, mm Horizontal track length	H - НL + 470...600
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
Q, mm Shaft opener position	300

High lift low level drums

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥1 500
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	1 330 ≤ HL ≤ h - 150
A, mm Angle track height	H + HL
Ab, mm Height of shaft axle and drum	H + 400...600 + 280
A1, mm Vertical track height	А - 580
A2, mm Horizontal track height	А - 53
E, mm Horizontal track length	H - НL + 470...600
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	500
Q, mm Shaft opener position	≥ 500

High inclined lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	660
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	330
A, mm Angle track height	H + HL + 15...749
Ab, mm Height of shaft axle and drum	≤ А + 86/97
A1, mm Vertical track height	Н + HL - 330...580
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	300

High lift inclined low level drums

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	1 500
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	≥ 1 330
A, mm Angle track height	H + HL + 15...749
Ab, mm Height of shaft axle and drum	Ab > H + 680
A1, mm Vertical track height	Н + HL - 330...580
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	500
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	≥ 650

Vertical lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	Н + 350 H<5 500 (H>5 500 on request)
B, mm Opening width	B
A, mm Angle track height	2H + 120
Ab, mm Height of shaft axle and drum	A + 166
A1, mm Vertical track height	Н
S, mm Minimum side room clearance	120
Q, mm Shaft opener position	300

Vertical lift low level drum

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	H + 120
B, mm Opening width	B
A, mm Angle track height	2H + 120
Ab, mm Height of shaft axle and drum	H + 680
A1, mm Vertical track height	H + 850
S, mm Minimum side room clearance	500
Q, mm Shaft opener position	≥ 650

Parameter	Value	Notes
Thermal resistance, m² · °С/W	0,4 (В)	depends on door size
Number of cycles	durability 10 000 (opening/closing) cycles for door and parts; 25 000 cycles for springs
Door leaf weight, kg/m²	14,5	depends on type and size of door panels
Force of manual opening and closing, N	260

Door leaf should smoothly slide vertically along the tracks, and be properly balanced, i. e. counterbalancing mechanism should compensate leaf weight.

For opening the door in manual operation use only the door handle.

Do not lift too much force when opening/closing the door. Prevent any sharp movements of the door.

Keep people and animals clear of opening while door is operated.

Never stay or cross an opening under a moving door leaf as it may cause serious injury or death.

Don’t strike the door leaf or obstruct its movement.

Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door opener (if used).

Keep the door opening clear of any objects and litter as it may unbalance and jam the door leaf.

Packing in cardboard	Packaging features
Description	the door leaf and the tracks system are packed in a fibre board and polystyrene combination wrapped in a stretch film.Hardware is packed a box wrapped in a stretch film. All packages are labeled with stickers containing order information and DoorHan logo
Contents	corrugated fiberboard, polystyrene, stretch-film, adhesive tape
Width, mm	from 500 to 800
Height, mm	from 200 to 800
Length, mm	from 2 100 to 6 200
Gross weight, kg	up to 1 000
Number of items in the packaging	leaf packaging — from 3 to 13 panels; tracks package — 1 track system; hardware — 1 box (or more); extra packages (for framing, delta-profile/struts, etc.)

Additional Information print

Sandwich panels should be stored in producer’s packaging on a flat horizontal surface in warehouses or under a canopy for a period not exceeding 6 months from the production date. Provide proper protection from water, snow, dirt, and direct sunlight.

Installation

Mounting Options

Checking Dimensional Details

Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.

All the necessary measurements are taken inside the premises with just a measuring tape and a water level. Every dimension should be taken at least in three points:
H — opening height (distance from floor to opening top);
B — opening width (distance between left and right side of the opening);
h — headroom (distance between opening top and ceiling) min 150 mm;
b1/ b2 — left/right sideroom (distance between a corresponding opening edge and obstacle) min 120 mm;
L — backroom.
When measuring Н and В the largest figure is taken for final dimension.
When measuring h, b1, b2 and L the smallest figure is taken for final dimension.
Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and siderooms is level. The inside perimeter of the door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.

Warranty print

DoorHan warrants to the original purchaser of the product that the sandwich panels and steel profiles of the track system will be free from corrosion for a period of ten years.

New Products

Shatterproof impact-resistant polycarbonate used as glazing for Full-vision doors.

Double reinforcement on side aluminium profile provides structural rigidity and secure fastening of brackets.

Special reinforcement provides structural rigidity of top aluminium profile and reliability of brackets mounting.

Top reinforced profile provides structural rigidity of big-size sectional doors and has special reinforcement for brackets mounting.

Bottom aluminium profile is reinforced to enhance rigidity of construction and to provide secure fastening of the brackets.

New plastic handle for full-vision doors is reliable and convenient to use.

Design

Panel Type

S-line

V-line

W-line

M-line

A-Line

D-Line

Surface Type

Woodgrain

Stucco

Smooth

Full-vision panels

Full-vision panel with single acrylic glass

Door panel options

Standard glazing

Full-vision glazing

Combined full-vision and sandwich panels

Colour Options

RAL 9016

RAL 9010

RAL 9007

RAL 9006 White aluminium (standard)

RAL 9005

RAL 8017 Chocolate brown (standard)

RAL 8014 Sepia brown (standard)

RAL 7040

RAL 7016 Anthracite grey (standard)

RAL 7016 SANDGRAIN

RAL 6009

RAL 5010

RAL 3000 Flame red (standard)

Custom Ral-colour

DB703

Equipment

Standard

Full-vision door panel. Unbreakable, impact resistant polycarbonate is used as panel glazing.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

High-quality durable torsion springs designed for 25 000 closing cycles provide effortless closing and opening of the door.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by fixing itself to the track in case of cable failure.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

A set of mounting hardware, instruction manual and product technical data.

Optional

Double sided lock blocks the door leaf from inside and outside.

Cath lock blocks the door leaf from inside.

Manual chain operator can be installed to any lift type commercial sectional door and is used for manual opening/closing of the door.

Torsion spring mechanism has a lifetime of 100 000 cycles.

Industrial doors can be equipped with openers and safety devices (go to Sectional Door Automation).

Technical description

Size Table

Parameters

Value

Opening height, mm

2 000–6 000

Opening width, mm

2 000–6 000

Headroom, mm

from 230

Sideroom clearance, mm

from 120

Panoramic panel height, mm

from 370 to 720

Panoramic panel width, mm

not more than 3 000 mm

Construction

Vertical track
Vertical angle
Cylindrical shaft
Spring safety device
Drum
U-shaped bracket
Counterbalancing mechanism (torsion spring)
Steel coupler
Internal support bracket
Top support with roller holder
Side support with roller holder
Hinge
Cable break safety device
Bottom profile
Panoramic panel
Bottom seal
Side seal
Top profile
Top seal
Perforated side cap
Full-vision impact-resistant filling
Spring bumper
Universal mounting bracket for horizontal tracks

Standard Construction

Low lift, front mount

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	230: H<3 700
B, mm Opening width	B
A, mm Angle track height	H + 110
Ab, mm Height of shaft axle and drum	≥ A + 59
A1, mm Vertical track height	А - 543
A2, mm Horizontal track height	А - 106
E, mm Horizontal track length	Н + 300
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 185
n, mm Clear opening	H-250 mm (without operator) H-200 mm (with operator)

Low lift drum behind

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	150: H< 3 700
B, mm Opening width	B
A, mm Angle track height	if h < 170: H + 110; if 150 ≤ h ≤170: H + h - 60
Ab, mm Height of shaft axle and drum	if h ≤ 170: H + 55; if 150 ≤ h ≤ 170: H + h - 47
A1, mm Vertical track height	А - 543
A2, mm Horizontal track height	А - 106
E, mm Horizontal track length	Н + 510
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1,185
n, mm Clear opening	H-200 mm (without operator) H-200 mm (with operator)

Standard lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	350: H<3 700 420: 3 700
B, mm Opening width	B
A, mm Angle track height	R381: H + 235; R305: H + 165
Ab, mm Height of shaft axle and drum	A + 97
A1, mm Vertical track height	R381: A — 580; R305: A — 490
A2, mm Horizontal track height	А - 110
E, mm Horizontal track length	R381: H + 200; R305: H + 250
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
P, mm Door opener position	Н + 1 060
Q, mm Shaft opener position	300

Standard inclined lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	500
B, mm Opening width	B
A, mm Angle track height	H + 250...985
Ab, mm Height of shaft axle and drum	А + 86/97
A1, mm Vertical track height	Н - 300
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	300

High lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	660
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	by default h — 330
A, mm Angle track height	H + HL
Ab, mm Height of shaft axle and drum	A + 86/97
A1, mm Vertical track height	А - 580
A2, mm Horizontal track height	А - 53
E, mm Horizontal track length	H - НL + 470...600
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
Q, mm Shaft opener position	300

High lift low level drums

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	≥1 500
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	1 330 ≤ HL ≤ h - 150
A, mm Angle track height	H + HL
Ab, mm Height of shaft axle and drum	H + 400...600 + 280
A1, mm Vertical track height	А - 580
A2, mm Horizontal track height	А - 53
E, mm Horizontal track length	H - НL + 470...600
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	500
Q, mm Shaft opener position	≥ 500

High inclined lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	660
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	330
A, mm Angle track height	H + HL + 15...749
Ab, mm Height of shaft axle and drum	≤ А + 86/97
A1, mm Vertical track height	Н + HL - 330...580
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	120
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	300

High lift inclined low level drums

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	1 500
B, mm Opening width	B
HL, mm Distance from opening to horizontal tracks level	≥ 1 330
A, mm Angle track height	H + HL + 15...749
Ab, mm Height of shaft axle and drum	Ab > H + 680
A1, mm Vertical track height	Н + HL - 330...580
E, mm Horizontal track length	depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space	depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance	500
α° Angle of the tracks to horizontal	5...65 (divisible by 5°)
Q, mm Shaft opener position	≥ 650

Vertical lift

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	Н + 350 H<5 500 (H>5 500 on request)
B, mm Opening width	B
A, mm Angle track height	2H + 120
Ab, mm Height of shaft axle and drum	A + 166
A1, mm Vertical track height	Н
S, mm Minimum side room clearance	120
Q, mm Shaft opener position	300

Vertical lift low level drum

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	H + 120
B, mm Opening width	B
A, mm Angle track height	2H + 120
Ab, mm Height of shaft axle and drum	H + 680
A1, mm Vertical track height	H + 850
S, mm Minimum side room clearance	500
Q, mm Shaft opener position	≥ 650

Specifications

Parameter	Value	Notes
Thermal resistance, m² · °С/W	0,4 (В)	depends on door size
Number of cycles	durability 10 000 (opening/closing) cycles for door and parts; 25 000 cycles for springs
Door leaf weight, kg/m²	14,5	depends on type and size of door panels
Force of manual opening and closing, N	260

Operating Conditions

Door leaf should smoothly slide vertically along the tracks, and be properly balanced, i. e. counterbalancing mechanism should compensate leaf weight.

For opening the door in manual operation use only the door handle.

Do not lift too much force when opening/closing the door. Prevent any sharp movements of the door.

Keep people and animals clear of opening while door is operated.

Never stay or cross an opening under a moving door leaf as it may cause serious injury or death.

Don’t strike the door leaf or obstruct its movement.

Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door opener (if used).

Keep the door opening clear of any objects and litter as it may unbalance and jam the door leaf.

Packaging

Packing in cardboard	Packaging features
Description	the door leaf and the tracks system are packed in a fibre board and polystyrene combination wrapped in a stretch film.Hardware is packed a box wrapped in a stretch film. All packages are labeled with stickers containing order information and DoorHan logo
Contents	corrugated fiberboard, polystyrene, stretch-film, adhesive tape
Width, mm	from 500 to 800
Height, mm	from 200 to 800
Length, mm	from 2 100 to 6 200
Gross weight, kg	up to 1 000
Number of items in the packaging	leaf packaging — from 3 to 13 panels; tracks package — 1 track system; hardware — 1 box (or more); extra packages (for framing, delta-profile/struts, etc.)

Additional Information

Installation

Mounting Options

Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.

Checking Dimensional Details

All the necessary measurements are taken inside the premises with just a measuring tape and a water level. Every dimension should be taken at least in three points:
H — opening height (distance from floor to opening top);
B — opening width (distance between left and right side of the opening);
h — headroom (distance between opening top and ceiling) min 150 mm;
b1/ b2 — left/right sideroom (distance between a corresponding opening edge and obstacle) min 120 mm;
L — backroom.
When measuring Н and В the largest figure is taken for final dimension.
When measuring h, b1, b2 and L the smallest figure is taken for final dimension.
Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and siderooms is level. The inside perimeter of the door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.

Warranty

DoorHan warrants to the original purchaser of the product that the sandwich panels and steel profiles of the track system will be free from corrosion for a period of ten years.

Checkout

Managers of the company will answer all
questions by phone:

+420 702 185 654

CALL BACK

ISD02 Full-Vision Industrial Sectional Doors