Rollgitter RHE78G mit Polycarbonat-Einsätzen

<div class="doorhan-section-content">
  <h2>Rollgitter RHE78G mit Polycarbonat-Einsätzen – Transparente Objektsicherung</h2>
  <p>Das Rollgittersystem RHE78G verbindet wirksamen Einbruchschutz mit repräsentativer Transparenz. Es wurde gezielt für den Einzelhandel in Einkaufszentren, Bahnhöfen und belebten Fußgängerzonen entwickelt. Großzügige Öffnungen in den stranggepressten Aluminiumprofilen ermöglichen es Passanten, Ausstellungsstücke und Waren im Innenraum auch außerhalb der Öffnungszeiten ungetrübt zu betrachten.</p>
  <p>Um das Hindurchgreifen oder Einwerfen von Gegenständen zu unterbinden, sind die Gitterausschnitte mit schlagzähen Einsätzen aus transparentem Polycarbonat versehen. Dieses Material zeichnet sich durch hohe optische Klarheit sowie Bruchfestigkeit aus. Das robuste Aluminiumgitter schützt die Scheiben vor Beschädigung und bildet eine verlässliche physische Barriere.</p>
  <p>Dank der stabilen Querverstrebungen eignet sich das RHE78G für erhebliche Öffnungsbreiten im Ladenbau. Der Behang läuft geräuscharm in geführten Bürstendichtungen und lässt sich über moderne Motorsteuerungen bequem bedienen.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Welche Funktion erfüllen die transparenten Einsätze im Gitterprofil?</h4>
      <p>Die Polycarbonat-Einsätze verhindern das Durchgreifen und das Einbringen von Schmutz oder Gegenständen, ohne die Durchsicht auf die Schaufensterauslage zu beeinträchtigen.</p>
    </div>
    <div class="faq-item">
      <h4>Wo wird das Rollgitter RHE78G bevorzugt eingesetzt?</h4>
      <p>Typische Einsatzorte sind Verkaufsgeschäfte in überdachten Shoppingmalls, Juweliere, Bankfilialen sowie Boutiquen mit hoher Publikumsfrequenz.</p>
    </div>
  </section>
</div>

Application:

Store fronts, entrance openings of car washes and car services

Order with installation

Design

Slat Profile

Colour Options

RHE78G fenestrated extruded profile

White

Brown

Grey

Beige

Green

Blue

Maroon

Silver

Equipment

Standard

Optional

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.

Curtain assembly. Assembly of extruded profiles with side locks, preventing slats from disengaging.

End profile with seal. End profile can be fitted with a locking mechanism.

Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.

Tubular motor.

Box for the components.

SWB key-switch for face of wall installation.

SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.

CV01 control box for remote control of one or several rolling shutters.

SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.

Wi-Fi-module for wireless control of electric drives (control signal, NO).

GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.

Transmitter-4 remote control operates four devices.

Transmitter-4PRO-Black remote control operates four automatic devices.

Photocell-N safety photocells consisting of infrared transmitter and receiver.

Lamp-PRO-series LED lamp with antenna.

Technical description

Size Table

Opening Dimensions

Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

from 1 000 to 4 500

Opening width, mm

from 1 000 to 5 200

Maximum door curtain area, sqm

Headroom, mm

from 300 (face of wall mounting)

Sideroom clearance, mm

from 83 (face of wall mounting)

Hood side cap RK300, RSK300, RK375
Bearing support BS32
3a. Guiding roller RU77 (RV77)
Bearing BS32
Universal capsule KPU102
Octagonal shaft RV102
Hood RB300, RB375
Top profile RH30FM
Tubular motor
Headplate BU100K
Guide rail RG83MS, RG90M, RG90MS, RG100
Plug PB14
SLE78 side lock
End profile RA77EM, RA77KN
Slat (curtain) RHE78G
Key lock switch SWM, SWK
Key switch SWB, SWH

Parameter	Value	Notes
	Extruded fenestrated profile RHE78G
Material	aluminium
Slats weight, kg/rmt	0,571
Slats weight, kg/sqm	7,42
Number of slats per 1 m of curtain height, pcs	13
Maximum door curtain width, m	5,2
Maximum door curtain area, sqm	15

Correct installation and operation of rolling shutters and rolling doors guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:

Only qualified personnel trained at DoorHan training centers should install roll-up doors or rolling shutters.

Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.

Roll-up doors should open smoothly without jolts or jamming.

Use only specified equipment for opening and closing of the doors.

Don’t exert pressure exceeding 100 N when opening the rolling shutters.

Partial opening or closing of the shutters, especially with large curtain area (curtain size more than 3,000 x 2,000 mm), is undesirable.

If rolling shutteris are equipped with a mechanical lock or a latch lock unlock it before opening the shutters.

If rolling shutters are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling shutters. If the operated rolling shutter is large use emergency manual drive only for closing.

Follow the corresponding operation and installation instructions when using an electric motor.

Do NOT permit children to play on, near the operating area, or with the rolling shutters or to operate controls.

Keep door/window opening clear of people and animals while operating the shutters.

Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.

Don’t strike the shutter curtain or obstruct its movement.

Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.

Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be a communication describing the arisen problem which can be documented).

In winter, in case of ice coating of rolling shutter parts, it’s necessary to pre-tap the shutter curtain perimeter to release it of ice before operating the shutters. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).

Carry out rolling shutter maintenance at least once a year.

Should the rolling shutters be used for other purposes or should their size exceed the recommended one, the manufacturer holds no responsibility for their integrity and correct operation.

Adjustments or repairs must be made by a trained technician using proper tools and instructions.

Packing in cardboard	Packaging features
Description	The packaging comprises bubble wrap and white double wall corrugated cardboard; the hood with rolled in shutter curtain is wrapped in bubble wrap and than in cardboard sheet. This box is than double wrapped in stretch film and fixed with adhesive tape with DoorHan logo.
Height, mm	from 300 to 375
Width, mm	from 300 to 375
Length, mm	from 1 000 to 6 000

Additional Information print

Door curtain can be a combination of fenestrated (RHE84GM) and foam-filled (RH77M) slat profiles.

Installation

Mounting Options

Checking Dimensional Details

Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter box. Shutter box with curtain is installed above the opening and the guide rails — on either side of the opening. Closed rolling doors completely cover the opening and are almost flush with the walls.

Between jambs mount, shutter box outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises.

Opening parameters for overhead mounting: H — opening height (max), mm; B — opening width (max), mm; h1 — headroom (min), mm; b1 and b2 — sideroom clearance (min), mm. Use a measuring tape and a water level, or electronic measuring instruments to take all the necessary measurements. Every dimension should be taken at least in three points. When measuring the opening for overhead mounting take into account walls unevenness and reduce the measuring 5-10 mm.
Observe the following requirements when preparing the opening: the opening must be perpendicular, plumb, and square; it should have smooth and level surfaces having no build-ups of plaster and cracks; the walls should be monolith, without cavities (concrete, metal, solid brick); in case of installation on hollow brick wall edge the opening with metal angle; interior and exterior walls in place of the shutter mounting should be flat, without bulges and hollows; deviations of working surfaces from vertical and horizontal should not exceed 1.5-5 mm per meter and the difference of the diagonals — not more than 5 mm.

Warranty print

DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.

New Products

New steel side covers RS137 and RSK300, made of galvanized steel, have high anti-corrosion properties and strength characteristics, and are painted in the color of the box.

Reinforced guide profile RG100.

New reliable packaging.