Stranggepresste Rolltore Serie RHE84M & GM

<div class="doorhan-section-content">
  <h2>Garagen- und Außentore RHE84M / RHE84GM – Formstabile Strangpress-Rolltore</h2>
  <p>Die Rolltorsysteme der Baureihen RHE84M und RHE84GM bieten eine hochfeste Verschlusslösung für Garageneinfahrten, Tiefgaragenzufahrten und freistehende Hofeinfahrten. Das aus einer Aluminiumlegierung stranggepresste Großprofil bietet eine ausgeprägte Biegesteifigkeit und hält hohen Windlasten an exponierten Außenfassaden stand.</p>
  <p>Das geschlossene Profil RHE84M schützt das Gebäudeinnere zuverlässig vor Witterungseinflüssen, Staub und unbefugtem Zutritt. Für Bereiche mit Bedarf an Sichtkontakt oder Zuluft steht die Variante RHE84GM mit regelmäßig gestanzten Öffnungen zur Verfügung. Beide Profiltypen lassen sich in einem Behang harmonisch kombinieren, um individuelle Belüftungs- und Lichtkonzepte zu realisieren.</p>
  <p>Die vertikale Aufrolltechnik ohne Deckenlaufschienen erhält den gesamten Innenraum frei. Robuste Stahlkonsolen und Führungsschienen mit reibungsarmen Gleitern sichern den zuverlässigen Lauf auch bei hoher Betätigungsfrequenz.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Warum wird für Außentore das Profil RHE84M gewählt?</h4>
      <p>Die massive Wandstärke des stranggepressten Profils bietet eine sehr hohe Widerstandskraft gegen Winddruck und mechanische Beanspruchung im Außenbereich.</p>
    </div>
    <div class="faq-item">
      <h4>Kann das Tor RHE84M mit Sichtöffnungen ausgestattet werden?</h4>
      <p>Ja, durch den Einsatz von RHE84GM-Lamellen können Belüftungszonen oder Sichtbereiche flexibel in den Panzer integriert werden.</p>
    </div>
  </section>
</div>

Application:

Entrance and garage openings with strict requirements for burglary protection

Order with installation

Design

Extruded profiles for roller shutters

Primary colors

Additional colors

RHE84/RHE84GM

White

Brown

Grey

Beige

Silver

RAL 1007 Daffodil yellow

RAL 1013 Oyster white

RAL 1015 Light ivory

RAL 1017 Saffron yellow

RAL 1019 Grey beige

RAL 3004 Purple red

RAL 3020 Traffic red

RAL 5011 Steel blue

RAL 7016 Anthracite grey

RAL 7035 Light grey

RAL 8017 Chocolate brown

RAL 8019 Grey brown

RAL 9005 Jet black

Equipment

Standard

Optional

Box assembled. It is an assembled protective box with side covers, a shaft and capsules, and a control mechanism.

The canvas is assembled. Extruded profile sheet with side locks to prevent profile divergence. The canvas can be combined from a solid and lattice profile.

End profile with seal. Locking mechanisms can be installed in the end profile.

Set of guide profiles with seal. A large selection of standard and reinforced guides allows you to select profiles for roller shutter systems installed on openings of any size, taking into account wind loads and burglary resistance requirements.

Internal electric drive.

Box with complete set.

Key switch SWB.

Key-button SWM for sending a control command to the electric drive control unit by turning the key.

Control unit CV01 for remote control of one roller shutter or a group of roller shutters.

SMARTROLLl control unit for remote control of internal roller shutter electric drives using DoorHan remote controls.

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control.

WI-FI module for wireless control (generation of control signal, NO) of electric drives.

GSM module for receiving a signal from a mobile phone and transmitting a control command to start the electric drive.

TRANSMITTER 4 remote control for remote control of four automatic devices.

TRANSMITTER 4-PRO-BLACK remote control for remote control of four automatic devices.

Safety photocells PHOTOCELL-N, consisting of an infrared transmitter and receiver.

LED signal lamp with LAMP-PRO antenna.

Technical description

Size Table

Opening Dimensions

Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

From 1,000 to 5,000

Opening width, mm

From 1,000 to 5,500

Maximum door curtain area, sqm

20.5

Headroom, mm

From 300 (surface mounting)

Sideroom clearance, mm

From 83 (surface mounting)

Side cover RK300, RSK300, RSK330, RK375
Bearing support BS32
3a. Guiding roller RU77 (RV77)
Bearing BS32
Universal capsule KPU102
Octagonal shaft RV102
SLE117 side lock
Protective box RBN300, RBN330, RBN375
Upper profile RH30FM
Intrashaft electric drive
BU100K drive mounting plate
Guide profile RG83MS, RG90M, RG90MS, RG100
Plug PB14
Side lock SL84, SLE84
End profile RA77EM, RA77KN
Profile (canvas) RHE84M, RHE84GM
Key lock switch SWM, SWK
Key switch SWB, SWH

Parameter	Value	Notes
	Extruded solid profile RHE84M
Material	Aluminium
Slats weight, kg/rmt	0.797
Slats weight, kg/sqm	9.6
Number of slats per 1 m of curtain height, pcs	12
Maximum door curtain width, m	5.5
Maximum door curtain area, sqm	20.5
	Extruded lattice profile RHE84GM
Material	Aluminium
Slats weight, kg/rmt	0.593
Slats weight, kg/sqm	7.11
Number of slats per 1 m of curtain height, pcs	12
Maximum door curtain width, m	5.5
Maximum door curtain area, sqm	20.5

Properly installed and operated roller shutters guarantee reliable and durable operation. To extend the life of your roller shutters, follow these instructions.

1. Installation of roller shutters and roller shutters must be carried out by qualified specialists who have been trained by the DoorHan concern.

2. Installation of the product must be carried out strictly in accordance with the installation instructions for roller shutters and the technical documentation of the DoorHan concern.

3. Roller shutters should open smoothly, without jerks or jolts.

4. To raise and lower structures, use only controls designed for this purpose.

5. Do not use more than 100 N force to open the roller shutters.

6. Partial raising or lowering of the roller shutter leaf is not recommended, especially for large structures (size more than 3,000 × 2,000 mm).

7. If a mechanical lock or latch is used in the design, lifting the blade when the lock is closed is prohibited.

8. When using a cardan drive, when rotating, the knob should be held at an angle of 45°. According to EN 12453 or 12604, a manual force of 390 N is permissible. In the case of large roller shutters, the emergency manual drive (hinge, cardan) is only suitable for closing.

9. When using an automatic drive, follow the instructions supplied with the drive.

10. Keep children away from roller shutter control devices (buttons, remote controls).

11. Make sure that people and animals are not within the range of the roller shutters while they are opening or closing.

12. It is strictly prohibited to stand under the structure while it is in operation, as this can lead to injury.

13. Do not subject the roller shutters to impacts or interfere with their free opening and closing.

14. Make sure that while moving the roller shutter leaf there are no foreign objects in the opening, as this may lead to damage to the structure.

15. It is prohibited to install additional equipment or accessories, as well as to independently replace or adjust individual parts, without consultation with the manufacturer (consultation is considered to be a request that contains a clear description of the problem that has arisen, which can be documented).

16. In winter, in case of icing of parts of the roller shutter or roller shutter structure, before raising and lowering the canvas, it is first necessary to tap the structure along the contour until the parts of the structure are completely free of ice, paying special attention to the condition of the junction of the bottom strip of the product with the window sill or floor, they also must be cleaned.

17. It is necessary to carry out regular maintenance of roller shutters, at least once a year.

18. If roller shutters are used for purposes other than their intended purpose or structures whose dimensions exceed those recommended by the manufacturer, the manufacturer is not responsible for their integrity and proper operation.

19. Diagnostics and repair of roller shutter or roller shutter structures should be carried out only by qualified specialists.

Packing in cardboard	Packaging features
Description	The packaging of roller shutters consists of air bubble film and five-layer white cardboard; the canvas and the box are wrapped in bubble wrap, then wrapped in cardboard to form a box; The cardboard packaging is covered with 2 layers of stretch film on top and secured with tape with the company logo.
Height, mm	From 300 to 375
Width, mm	From 300 to 375
Length, mm	From 1,000 to 6,000

Additional Information print

It is possible to combine a sheet of solid profile RHE84M and lattice profile RHE84GM

Installation

Mounting Options

Checking Dimensional Details

Overlay installation. Overhead installation is the most common; it does not require labor-intensive preparation of slopes associated with preparing a niche for the box. With the overhead type of installation of roller shutters or roller shutters, a box with a roller blade is installed above the opening, and guide profiles are installed on both sides of it. Closed roller shutters completely cover the opening and are almost flush with the surface of the walls.

Built-in installation. Built-in installation allows you to place all the elements of a roller shutter or roller shutter in a niche of a window or doorway. With a built-in installation, doors and windows should open in the direction opposite to its installation.

Measuring parameters for surface mounting:
H — opening height (max), mm;
B — opening width (max), mm;
h1 — lintel height (min), mm;
b1 and b2 — right and left lateral distances (min), mm.
Measurement parameters for built-in installation:

H — opening height (min), mm;
B — opening width (min), mm.
To take measurements, you must use a tape measure and a building level, or electronic measuring instruments. It is recommended to measure each parameter at a minimum of three points. When measuring the opening for structures mounted in a built-in way, you should take into account the unevenness of the walls and adjust the measurements downward by 5–10 mm
Prepared openings must meet the following requirements: openings must be rectangular in shape; the surface of the opening planes must be flat and smooth, without sagging plaster and cracks; the wall must be monolithic, without voids (concrete, metal, solid brick); if the brick is hollow, it is recommended to edge the opening with a metal corner; the internal and external planes of the walls at the junction of structures must be smooth, without protrusions and depressions; deviations of working surfaces from vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm, the difference in diagonals should not exceed 5 mm.

Warranty print

The buyer is provided with a performance guarantee for roller shutter systems produced by the DoorHan concern for a period of 1 year from the date of purchase of this product. In case of damage to the paintwork as a result of the influence of climatic factors, natural phenomena, the release of fine solid particles or other aggressive substances, corrosion from scratches and chips that occur during operation, the warranty for the paintwork becomes invalid.

New Products

New steel side covers RS137 and RSK300, made of galvanized steel, have high anti-corrosion properties and strength characteristics, and are painted in the color of the box.

Reinforced guide profile RG100.

New reliable packaging.