Stahl-Schaufenster-Rolltore der Serie RHS52

<div class="doorhan-section-content">
  <h2>Stahl-Schaufenster-Rolltore Serie RHS52 – Mechanischer Schutz gegen Vandalismus</h2>
  <p>Die Schaufenster-Rolltore der Serie RHS52 kommen dort zum Einsatz, wo Ladenfronten, Kioske oder Schalteranlagen einem erhöhten Risiko von Vandalismus oder Gewalteinwirkung ausgesetzt sind. Das rollgeformte Stahlprofil aus feuerverzinktem Bandstahl bietet eine deutlich höhere Härte und Verformungsbeständigkeit als Standardprofile aus Leichtmetall.</p>
  <p>Die kompakte Geometrie der RHS52-Stahllamellen sorgt für einen engen Wickelradius auf der Welle. Dies ermöglicht die Unterbringung des Behangs in platzsparenden Schutzkästen, die unauffällig über der Schaufensteranlage montiert werden können. Die verzinkte Stahloberfläche schützt die Lamellen dauerhaft vor Feuchtigkeit und Korrosion im Außenbereich.</p>
  <p>Stahlführungsschienen mit hoher Wandungsstärke führen den Panzer zuverlässig und halten auch massiven Tritten oder Schlagwerkzeugen stand. Elektroantriebe mit integrierter Fangvorrichtung oder mechanischer Notbedienung gewährleisten einen reibungslosen Betriebsablauf im Geschäftsalltag.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Warum wird für Schaufenstertore das Stahlprofil RHS52 gewählt?</h4>
      <p>Verzinkter Stahl zeichnet sich durch hohe Festigkeit und Zähigkeit aus. Er bietet soliden Widerstand gegen gezielte Vandalismusschäden und gewaltsames Eindringen.</p>
    </div>
    <div class="faq-item">
      <h4>Rostet das Stahlprofil RHS52 bei Außenmontage?</h4>
      <p>Nein, die Lamellen bestehen aus werkseitig feuerverzinktem Stahlband und sind durch eine witterungsbeständige Beschichtung zuverlässig vor Korrosion geschützt.</p>
    </div>
  </section>
</div>

Application:

Window and door openings

Order with installation

Advantages

Burglar-resistant design

Increased strength characteristics of roller shutters are ensured by the use of profiles (class P4) made of cold-rolled galvanized steel 0.7 mm thick and reinforced guides that reliably hold the sheet under strong wind or shock loads.

Durable lamella coating

The leaf profiles and other roller shutter components (guides and frames) are painted using modern powder coating technology, which provides them with a long-lasting aesthetic appearance and resistance to fading.

Variety of design solutions

The constant expansion of the color palette of roller shutter profiles, as well as the ability to assemble the fabric from lamellas of different colors, allows you to choose the ideal design for any architectural style.

Possibility of choosing a control method

For greater ease of use of roller shutters, the manufacturer offers an automatic drive (optional), as well as several options for mechanical devices: crank drive, spring-inertia mechanism, as well as belt, cord or cord drive.

Burglar-resistant design

Durable lamella coating

Variety of design solutions

Possibility of choosing a control method

Design

Steel profile for window openings and showcases

Primary colors

RHS52

White

Brown

Not-painted (zinc-coated)

Equipment

Standard

Optional

Box assembled. It is an assembled protective box with side covers, a shaft and capsules, and a control mechanism — manual or automatic.

The canvas is assembled. A sheet of steel profile with side locks that prevent the profile from diverging.

End profile with seal. Locking mechanisms can be installed in the end profile.

Set of guide profiles with seal. A large selection of standard and reinforced guides allows you to select profiles for roller shutter systems installed on openings of any size, taking into account wind loads and burglary resistance requirements.

Manual or automatic electric drive.

Box with complete set.

Key switch SWB

Key-button SWM for sending a control command to the electric drive control unit by turning the key

Control unit CV01 for remote control of one roller shutter or a group of roller shutters

SmartRoll control unit for remote control of internal roller shutter electric drives using DoorHan remote controls

Roll1/2 block for remote control of internal roller shutter electric drives using DoorHan remote controls

Group control unit GC2/GC4. GC2 for controlling two drives from one switch; block GC4 - for controlling four drives

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control

Wi-Fi module for wireless control (generation of control signal, NO) of electric drives

GSM module for receiving a signal from a mobile phone and transmitting a control command to start the electric drive

T5 remote control for controlling five roller shutters

TRANSMITTER-4 remote control for remote control of four automatic devices

TRANSMITTER-4PRO-BLACK remote control for four automatic devices

PHOTOCELL-N safety photocells consisting of an infrared transmitter and receiver

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

From 500 to 5,000

Opening width, mm

From 500 to 4,000

Maximum door curtain area, sqm

Headroom, mm

From 165 (surface mounting)

Sideroom clearance, mm

From 65 (surface mounting)

Side cover RK165, RK180, RK205, RK250, RSK300
Bearing support BS100, BS42
Guide device RU65
3a. Guide roller RU77
Bearing BR28, BR42
Universal capsule KP60, KPU60, KPU70, KPU70S, KPU102
Octagonal shaft RV60, RV70, RV102
Crossbar ring RD60, RD70
Protective box RBN165, RBN180, RBN205, RBN250, RBN300
Traction spring RS160
Intrashaft electric drive
BU100K drive mounting plate
Guide profile RG65BS, RG70BS
Plug PB14
Side lock SL52
End profile RA50EM
Profile (canvas) RHS52
Key switch SWM, SWK
Key switch SWB, SWH

Roller shutters with manual belt, cord or cord drive. An easy-to-use belt inertial drive is installed on roller shutters with a leaf weight of up to 15 kg. The roller shutter canvas rises and falls due to the tension of the tape. The cord drive is installed on roller shutters with a leaf weight of up to 20 kg. It is controlled by rotating the handle of the cord stacker. The cord drive lifts roller shutters with a web weight of up to 40 kg through the use of a durable steel cable. The operating principle is similar to a cord drive.

Roller shutters with manual crank drive. The crank drive allows you to lift roller shutters with a web weight of up to 30 kg. When the knob is rotated clockwise, the blade rises, and counterclockwise, it lowers.

Roller shutters with spring-inertial mechanism. The spring-inertia mechanism is used for roller shutters with a leaf weight of up to 60 kg. Roller shutters are easily lifted manually and quickly lowered under their own weight due to the fact that the weight of the roller shutter is balanced by a torsion spring mounted on the shaft.

Parameter	Value	Notes
	Steel profile RHS52
Material	galvanized steel 0.6 mm thick
Slats weight, kg/rmt	0.51
Slats weight, kg/sqm	9.8
Number of slats per 1 m of curtain height, pcs	19
Maximum door curtain width, m	4
Maximum door curtain area, sqm	14

Properly installed and operated roller shutters guarantee reliable and durable operation. To extend the life of your roller shutters, follow these instructions.

1. Installation of roller shutters and roller shutters must be carried out by qualified specialists who have been trained by the DoorHan concern.

2. Installation of the product must be carried out strictly in accordance with the installation instructions for roller shutters and the technical documentation of the DoorHan concern.

3. Roller shutters should open smoothly without jerking or jolting.

4. To raise and lower structures, use only controls designed for this purpose.

5. To open the roller shutters, do not apply a force exceeding 100 N.

6. Partial raising or lowering of the roller shutter leaf is not recommended, especially for large structures (size more than 3,000 × 2,000 mm).

7. If a mechanical lock or latch is used in the design, lifting the blade when the lock is closed is prohibited.

8. When using a cardan drive, when rotating, the knob should be held at an angle of 45°. According to EN 12453 or 12604, a manual force of 390 N is permissible. In the case of large roller shutters, the emergency manual drive (hinge, cardan) is only suitable for closing.

9. When using an automatic drive, follow the instructions supplied with the drive.

10. Keep children away from roller shutter control devices (buttons, remote controls).

11. Make sure that people and animals are not within the range of the roller shutters while they are opening or closing.

12. It is strictly prohibited to stand under the structure while it is in operation, as this can lead to injury.

13. Do not subject the roller shutters to impacts or interfere with their free opening and closing.

14. Make sure that while moving the roller shutter leaf there are no foreign objects in the opening, as this may lead to damage to the structure.

15. It is prohibited to install additional equipment or accessories, as well as to independently replace or adjust individual parts, without consultation with the manufacturer (consultation is considered to be a request that contains a clear description of the problem that has arisen, which can be documented).

16. In winter, in case of icing of parts of the roller shutter or roller shutter structure, before raising and lowering the canvas, it is first necessary to tap the structure along the contour until the parts of the structure are completely free of ice, paying special attention to the condition of the junction of the bottom strip of the product with the window sill or floor, they also must be cleaned.

17. It is necessary to carry out regular maintenance of roller shutters, at least once a year.

18. If roller shutters are used for purposes other than their intended purpose or structures whose dimensions exceed those recommended by the manufacturer, the manufacturer is not responsible for their integrity and proper operation.

19. Diagnostics and repair of roller shutter or roller shutter structures should be carried out only by qualified specialists.

Packing in cardboard	Packaging features
Description	Roller shutter packaging consists of bubble film and five-layer white cardboard; the canvas and the box are wrapped in bubble wrap, then wrapped in cardboard to form a box; The cardboard packaging is covered with 2 layers of stretch film on top and secured with tape with the company logo
Width, mm	From 165 to 300
Height, mm	From 165 to 300
Length, mm	From 500 to 6,000

Additional Information print

For entrance, garage and through openings, as well as in areas with high wind loads, only roller shutters from profiles of the RH77 and RHE84 series are installed.

Installation

Mounting Options

Checking Dimensional Details

Overhead installation is the most common; it does not require labor-intensive preparation of slopes associated with creating a niche for the box. With the overhead type of installation of roller shutters, a box with a roller blade is installed above the opening, and guide profiles are installed on both sides of it.

Built-in installation, the box facing outwards, allows you to place all the elements of the roller shutters in the niche of the window or doorway. With a built-in installation, doors and windows should open in the direction opposite to its installation.

Built-in installation, box inside. The structure is mounted in the opening, with the box inward, so that the canvas is flush with the opening.

Opening parameters for overhead mounting: H — opening height (max), mm B — opening width (max), mm h1 — headroom (min), mm b1 and b2 — sideroom clearance (min), mm Use a measuring tape and a water level, or electronic measuring instruments to take all the necessary measurements. Every dimension should be taken at least in three points. When measuring the opening for overhead mounting take into account walls unevenness and reduce the measuring 5-10 mm.
Observe the following requirements when preparing the opening: the opening must be perpendicular, plumb, and square; it should have smooth and level surfaces having no build-ups of plaster and cracks; the walls should be monolith, without cavities (concrete, metal, solid brick); in case of installation on hollow brick wall edge the opening with metal angle; interior and exterior walls in place of the shutter mounting should be flat, without bulges and hollows; deviations of working surfaces from vertical and horizontal should not exceed 1,5-5 mm per meter and the difference of the diagonals — not more than 5 mm.

Warranty print

The buyer is provided with a performance guarantee for roller shutter systems produced by the DoorHan concern for a period of 1 year from the date of purchase of this product. In case of damage to the paintwork as a result of the influence of climatic factors, natural phenomena, the release of fine solid particles or other aggressive substances, corrosion from scratches and chips that occur during operation, the warranty for the paintwork becomes invalid.

New Products

New steel side covers RSK300, made of galvanized steel, have increased anti-corrosion properties and strength characteristics, and are also painted in the color of the box.

New reliable packaging in white five-layer cardboard.