Freitragende mobile Verladerampe RMFS

<div class="doorhan-section-content">
  <h2>Freitragende mobile Verladerampe Serie RMFS – Eigenständige Stützkonstruktion</h2>
  <p>Die mobile Verladerampe der Baureihe RMFS zeichnet sich durch eine eigenständige, freitragende Abstützung aus. Im Unterschied zu Modellen, die auf der Ladefläche aufliegen, steht die Rampe RMFS auf eigenen stabilen Stützbeinen. Dadurch wird keinerlei Gewicht auf den Fahrzeugaufbau übertragen, was diese Lösung ideal für empfindliche Anhänger, Wechselbrücken oder Fahrzeuge mit begrenzter Hecktraglast macht.</p>
  <p>Das Fahrwerk und die modularen Stützen der Serie RMFS sind für hohe Achslasten von Gabelstaplern ausgelegt. Die Auffahrstrecke verfügt über eine griffige Lauffläche aus robusten Stahlgittern, die Schnee, Eis und Schmutz abweisen und eine verlässliche Traktion sicherstellen.</p>
  <p>Die Höheneinstellung erfolgt über ein manuelles oder elektrohydraulisches System, sodass sich die Rampe exakt an das Niveau des angedockten Fahrzeugs anpassen lässt. Ein Sicherheitsüberhang am Übergang sorgt für einen ebenen und stoßfreien Übergang für das Transportgut.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Welchen Vorteil bietet eine freitragende mobile Verladerampe RMFS?</h4>
      <p>Da die Rampe auf eigenen Stützen steht, wird die LKW-Karosserie nicht durch das Eigengewicht der Rampe oder die Befahrkräfte der Stapler belastet.</p>
    </div>
    <div class="faq-item">
      <h4>Für welche Fahrzeuge ist die Serie RMFS besonders geeignet?</h4>
      <p>Sie eignet sich vor allem für Fahrzeuge mit empfindlicher Heckkonstruktion, Wechselpritschen oder LKW mit Hebebühnen, bei denen kein Auflegen einer Lippe zulässig ist.</p>
    </div>
  </section>
</div>

Application:

Warehouses and logistics centres

Order with installation

Advantages

Easy access to the car body

Provides easy access for a lift truck to the car body.

Stable

Does not create additional load on the car body during operation.

Easy to use

Follows the movement of the vehicle body with articulated swivel ramps.

Various control options

Execution with various types of drives makes it possible to use the ramp without power supply.

Easy access to the car body

Provides easy access for a lift truck to the car body.

Stable

Does not create additional load on the car body during operation.

Easy to use

Follows the movement of the vehicle body with articulated swivel ramps.

Various control options

Execution with various types of drives makes it possible to use the ramp without power supply.

Design

Colour Options

RAL 5005 Signal blue

RAL 9005 Jet black

Equipment

Standard

Mobile yard ramp without truck bed support

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Parameters

Value

Length, m

12 375

Width, m

2 200

Ramp track width, m

1 900

Ramp track decking
Bottom hinged lip
Top hinged lip
Adjustable leg
Wheel

Mobile Yard Ramp without Truck Bed Support

Symbol, parameter name	Calculation formula
H, mm Length	12 375
B, mm Width	2 200
b1, mm Operating range, upward	1 500
b2, mm Operating range, downward	1 100

Parameter	Value	Notes
Load capacity, kg (kN)	7 000 (70) / 10 000 (100)
Maximum point load, Н/mm²	1,3	at customer’s request — 6,5
Number of lifting cylinders, pcs.	2	for ramp with hydraulic drive
Power, W	1 500	power of the hydraulic pump electric drive (for mobile ramps with hydraulic drive)
Supply voltage, V	380
Supply voltage, V	24
IP protection class	54
Preparation of steel surface before application of paints, class	Sa2
Hydraulic fluid	low-temperature STATOIL Hydraulic 131 oil
Weight, kg	2 975
Operating temperature range, °С	-30...+50

Don’t operate the ramp until its working zone is clear of people and goods.

Do not drive fork lift on the ramp unless the lip is securely on the truck bed and has a minimum of 250 mm overlap on its surface.

Don’t overload the ramp. The permissible load corresponds to the total weight of the fork lift with the load and the driver.

Don’t lift the mobile ramp with goods lying on it.

After the loading/unloading operations have been completed put the ramp into the stored position.

Don’t turn off the power from control unit during the whole loading/unloading cycle (for mobile ramps with hydraulic drive).

Don’t exceed the fork lift speed (not more than 5 km/hour).

Don’t drive the fork lift on the ramp until you are sure the lip is securely on the truck bed (for mobile ramps with hydraulic drive).

Make sure the WORK button is pressed, and the power switch of the control unit is ON during the whole loading/unloading cycle. Otherwise the hydraulic pump may be damaged (for mobile ramps with hydraulic drive).

Prior to operation take off the shipping fasteners. Attention! During loading/unloading operation the ramp with hydraulic drive and ramp with support on the trailer bed automatically follows the trailer bed height fluctuation. The ramp without support on the trailer bed has a lip which follows the truck bed movement (maximum deviation from the horizon is ±100 mm).

DoorHan mobile yard ramps can only be used with fork lifts having inflatable wheels. Don’t drive hydraulic trolleys and loaders with polyurethane wheels having high point load onto the ramp.

Additional Information print

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Warranty print

DoorHan warrants the mobile yard ramp without truck bed support to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.