Premium-Rollläden RHE45 für Fensteröffnungen

<div class="doorhan-section-content">
  <h2>Premium-Rollläden RHE45 – Hochfester Fensterschutz aus Strangpress-Aluminium</h2>
  <p>Die Premium-Rollläden der Serie RHE45 stellen eine verstärkte Schutzlösung für Fenster und Fenstertüren in privaten Residenzen sowie gewerblichen Objekten dar. Gefertigt aus massivem, stranggepresstem Aluminium zeichnet sich das Profil RHE45 durch eine beachtliche Steifigkeit und Formstabilität aus, die herkömmliche rollgeformte Lamellen deutlich übertrifft.</p>
  <p>Das Profil widersteht Verbiegungsversuchen und hemmt das gewaltsame Aushebeln des Behangs aus den seitlichen Führungsschienen. Die glattflächige Pulverbeschichtung schützt das Leichtmetall dauerhaft vor Witterungseinflüssen, Ausbleichen durch UV-Strahlung und mechanischem Abrieb. Der Behang wickelt sich gleichmäßig und formgenau in den kompakten Schutzkasten ein.</p>
  <p>Zur standardmäßigen Ausrüstung zählen integrierte Hochschiebesicherungen im Kastenbereich sowie verstärkte Endleisten. Der Betrieb erfolgt über verschleißarme Rohrmotoren, die über Wandschalter, Funkfernbedienungen oder automatisierte Steuerungsmodule bedient werden können.</p>
  <section class="faq-section">
    <h3>Häufig gestellte Fragen</h3>
    <div class="faq-item">
      <h4>Für welche Gebäude eignet sich das Premium-Profil RHE45 besonders?</h4>
      <p>Es wird vor allem für erdgeschossige Fenster, Terrassentüren und Gewerberäume gewählt, an denen ein gesteigerter physischer Einbruchschutz gefordert ist.</p>
    </div>
    <div class="faq-item">
      <h4>Ist das Profil RHE45 wärmegedämmt?</h4>
      <p>RHE45 ist ein massives einwandiges Strangpressprofil zur Steigerung der mechanischen Festigkeit. Der davorliegende Luftpolstereffekt bei geschlossenem Behang reduziert dennoch den Wärmeverlust am Fenster.</p>
    </div>
  </section>
</div>

Application:

Window and door openings in premises with strict requirements for security against burglary

Order with installation

Design

Slat Profile

Colour Options

RHE45 high strength double-skin extruded profile

Golden oak

Dark walnut

Equipment

Standard

Optional

Hood assembly. The set comprises of a hood, side caps, shaft, capsules and operating mechanism – manual or automatic.

Curtain assembly. Assembly of steel profiles with side locks, preventing slats from disengaging.

End profile with seal. End profile can be fitted with a locking mechanism.

Guide rails with seals. Wide variety of standard and reinforced guide rails allows rolling shutters to be installed in openings of any size taking into account wind load and complying with burglary resistance requirements.

Manual or automatic drive.

Box for the components.

SWB key-switch for face of wall installation.

SWM key-button switch (metal). Turning the key of SWM switch transmits a controlling signal to the control box of the electric drive shaft.

CV01 control box for remote control of one or several rolling shutters.

SmartRoll control box for remote control of tubular motors with DoorHan remote transmitters.

Roll 1/2 control box for remote control of tubular motors with DoorHan remote transmitters.

GC2/GC4 control boxes for several shutters control. GC2 box controls two motors with one switch; GC4 box — controls four motors.

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control.

Wi-Fi-module for wireless control of electric drives (control signal, NO).

GSM-module receives a mobile phone signal and transmits a control signal to operate electric drive.

T5 remote transmitter can operate five rolling shutters.

Transmitter-4 remote control operates four devices.

Transmitter-4PRO-Black remote control operates four automatic devices.

Photocell-N safety photocells consisting of infrared transmitter and receiver.

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

from 500 to 3 000

Opening width, mm

from 400 to 2 650

Maximum door curtain area, sqm

Headroom, mm

from 165 (face of wall installation)

Sideroom clearance, mm

from 53 (face of wall installation)

Hood side cap RK165D, RK165R, RK180D, RK180R, RK205D, RK205R
Bearing support BS100, BS42
Entry guide device RU45
Bearing BR28, BR42
Universal capsule KP40, KP60, KPU60, KPU70
Octagonal shaft RV40, RV60-1, RV60, RV70
Security lock ring RD40, RD60, RD70
Hood RBE165, RBE180, RBE205
Automatic lock RM2, RM3
Tubular motor
Headplate BU100K
Guide rail RG53M, RG53MS
Plug PB14
End lock SLE45
End profile RA45EN, RA45KN
Slat (curtain) RHE45
Key lock switch SWM, SWK
Key switch SWB, SWH

Rolling shutters operated with strap, rope or cord crank. Easy to operate strap crank is used with light weight shutters weighing less than 15 kg. Shutter curtain is raised and lowered by the strap tension. Rope crank operates shutters weighing less than 20 kg. Turning the handle of the rope winder operates shutter curtain. Cord crank raises rolling shutters weighing up to 40 kg with strong steel cord. The principle of operation is similar to the rope crank.

Rolling shutters operated with rod crank. Rod crank can raise shutters weighing up to 30 kg. Turning the crank rod clockwise you raise the curtain, turning it counterclockwise you lower the curtain.

Rolling shutters with spring loaded mechanism. Spring loaded mechanism is used to operate shutters weighing up to 60 kg. Rolling shutters are easily raised manually and lowered quickly under their own weight thanks to a torsion spring balancing the shutter curtain and installed on the octagonal shaft.

Parameter	Value	Notes
	RHE45
Material	aluminium
Slats weight, kg/rmt	0,242
Slats weight, kg/sqm	5,32
Number of slats per 1 m of curtain height, pcs	22
Maximum door curtain width, m	2,65
Maximum door curtain area, sqm	9

Correct installation and operation of rolling shutters guarantee their safe and durable service life. To keep shutters in good working condition, follow the instructions listed below:

Only qualified personnel trained at an training centers should install roll-up doors or rolling shutters.

Install rolling shutters following DoorHan operation and installation instructions and technical data sheets.

Rolling shutters should open smoothly without jolts or jamming.

Use only specified equipment for opening and closing of the shutters.

Don’t exert pressure exceeding 100 N when opening the rolling shutters.

Partial opening or closing of the shutters, especially with large curtain area (curtain size more than 3,000 x 2,000 mm), is undesirable.

If rolling shutter is equipped with a mechanical lock or a latch lock unlock it before opening the shutters.

If rolling shutters are operated with rod crank, hold the crank rod at 45° when turning it. According to EN12453 and 12604 standards one should not exert pressure exceeding 390 N when operating rolling shutters. If the operated rolling shutter is large use emergency manual drive only for closing.

Follow the corresponding operation and installation instructions when using an electric motor.

Do NOT permit children to play on, near the operating area, or with the rolling shutters or to operate controls.

Keep door/window opening clear of people and animals while operating the shutters.

Never stay or cross an opening under a moving shutter curtain as it may cause serious injury.

Don’t strike the shutter curtain or obstruct its movement.

Keep the door/window opening clear of any objects while operating the shutters as it may cause their damage.

Never install any optional equipment or accessories, replace or adjust some shutter parts without prior consultation with the manufacturer (consultation is considered to be a communication describing the arisen problem which can be documented).

In winter, in case of ice coating of rolling shutter parts, it’s necessary to pre-tap the shutter curtain perimeter to release it of ice before operating the shutters. Pay special attention to the place where bottom part of the curtain touches the floor or window sill (keep it clean too).

Carry out rolling shutter maintenance at least once a year.

Should the rolling shutters be used for other purposes or should their size exceeds the recommended one, the manufacturer holds no responsibility for their integrity and correct operation.

Adjustments or repairs must be made by a trained technician using proper tools and instructions.

Packing in cardboard	Packaging features
Description	The packaging comprises bubble wrap and white double wall corrugated cardboard; the hood with rolled in shutter curtain is wrapped in bubble wrap and than in cardboard sheet. This box is than double wrapped in stretch film and fixed with adhesive tape with DoorHan logo.
Height, mm	from 165 to 205
Width, mm	from 165 to 205
Length, mm	from 500 to 3 500

Additional Information print

Use roll-up doors/rolling shutters made of RH77 or RHE84 profile only for installation in entrance, garage or drive-through openings and in regions with high wind load.

Installation

Mounting Options

Checking Dimensional Details

Face of wall mount. The most popular type of installation which doesn’t require time-consuming preparation of the slopes and niche for the shutter hood. Shutter hood with curtain is installed above the opening and the guide rails — on either side of the opening. Closed rolling doors completely cover the opening and are almost flush with the walls.

Between jambs mount, shutter hood outward. All the rolling shutter components are installed inside the door or window opening. The window or door itself should open inward the premises.

Between jambs mount, shutter hood inward. The rolling shutter is installed inside the opening with the shutter hood turned inward so that the curtain is flush with the opening outside surface.

Opening parameters for face of wall mounting: H — opening height (max), mm; B — opening width (max), mm; h1 — headroom (min), mm; b1 and b2 — sideroom clearance (min), mm. Use a measuring tape and a water level, or electronic measuring instruments to take all the necessary measurements. Every dimension should be taken at least in three points. When measuring the opening for overhead mounting take into account walls unevenness and reduce the measuring 5-10 mm.
Observe the following requirements when preparing the opening: the opening must be perpendicular, plumb, and square; it should have smooth and level surfaces having no build-ups of plaster and cracks; the walls should be solid, without cavities (concrete, metal, solid brick); in case of installation on hollow brick wall edge the opening with metal angle; interior and exterior walls in place of the shutter mounting should be flat, without bulges and hollows; deviations of working surfaces from vertical and horizontal should not exceed 1.5-5 mm per meter and the difference of the diagonals — not more than 5 mm.

Warranty print

DoorHan warrants the roll-up doors/rolling shutters to operate properly for a period of 2 years from purchase date.

New Products

Spring-inertia mechanism 4ROL03/8. By reducing the length of the spring, it became possible to produce structures with a width of 400 mm or more.

Expansion of the range of end roller shutter profiles — profiles RA45KN015. The new end profiles are black and are more economical than the RA45EN.

New reliable packaging in white five-layer cardboard.