Mobile Ladebrücke RM | Kurze Rampe

Kurze Mobile Ladebrücke RM: Die flexible Lösung für den Spalt

Die kurze, mobile Verladerampe der Serie RM ist die einfachste und flexibelste Lösung, um den Spalt und leichte Höhenunterschiede zwischen einer stationären Laderampe und der LKW-Ladefläche schnell zu überbrücken. Sie ist die ideale Wahl, wenn keine fest installierte Überladebrücke vorhanden ist oder der Verladeort häufig wechselt.

Dank ihrer kompakten Bauweise und (je nach Modell) leichten Aluminium- oder Stahlkonstruktion kann die Rampe oft manuell oder mit einem Gabelstapler mühelos positioniert werden. Sie ist sofort einsatzbereit und erfordert keine Installation.

Die Vorteile der RM-Serie:

Extrem flexibel: An jeder Rampe sofort einsetzbar und leicht zu transportieren und zu lagern.
Sichere Überfahrt: Die rutschfeste Oberfläche gewährleistet eine sichere Traktion für Hubwagen oder Gabelstapler.
Robuste Konstruktion: Ausgelegt für hohe Traglasten und den täglichen, intensiven Gebrauch.
Wirtschaftliche Alternative: Eine kostengünstige und wartungsfreie Lösung im Vergleich zu fest installierten hydraulischen oder mechanischen Brücken.

Application:

Warehouses and Logistics Centres

Order with installation

Advantages

Easy access to the car body

Provides easy access for a lift truck from the ground to the car body.

Compact dimensions

Can be used if there is not enough space.

Easy to operate and store

It allows carrying out loading and unloading without resorting to the construction of a stationary ramp.

Various control options

Execution with various types of drives makes it possible to use the ramp without power supply.

Easy access to the car body

Provides easy access for a lift truck from the ground to the car body.

Compact dimensions

Can be used if there is not enough space.

Easy to operate and store

It allows carrying out loading and unloading without resorting to the construction of a stationary ramp.

Various control options

Execution with various types of drives makes it possible to use the ramp without power supply.

Design

Colours

RAL 5005 Signal Blue

RAL 9005 Jet Black

Equipment

Standard

Mobile yard ramp

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Parameters

Value

Length, m

9 880

Width, m

2 200

Ramp track width, m

1 900

Ramp track decking
Bottom hinged lip
Top hinged lip
Adjustable leg
Wheel

Shortened mobile ramp

Symbol, parameter name	Calculation formula
H, mm Length	9 880
B, mm Width	2 200
b1, mm Operating range, upward	1 500
b2, mm Operating range, downward	1 100

Parameter	Value	Notes
Operating temperature range, °С	-30...+50
Length, mm	9 880
Load capacity, kg (kN)	7 000 (70) / 10 000 (10)
IP protection class	54
Preparation of steel surface before application of paints, class	Sa2
Maximum point load, Н/mm²	1,3	at customer’s request — 6,5
Power, W	1 500	power of the hydraulic pump electric drive (for mobile ramps with hydraulic drive)
Supply voltage, V	380	for mobile ramps with hydraulic drive

Don’t operate the ramp until its working zone is clear of people and goods.

Do not drive fork lift on the ramp unless the lip is securely on the truck bed and has a minimum of 250 mm overlap on its surface.

Do not operate the ramp beyond its rated capacity. The permissible load corresponds to the total weight of the fork lift with the load and the driver.

Don’t lift the mobile ramp with goods lying on it.

After the loading/unloading operations completed put the ramp into the stored position.

Don’t turn off the power from control unit during the whole loading/unloading cycle (for mobile ramps with hydraulic drive).

Do not exceed 4 kmph when driving over the ramp.

Don’t drive the forklift on the ramp until you are sure the lip is securely on the truck bed (for mobile ramps with hydraulic drive).

Make sure the WORK button is pressed, and the power switch of the control unit is ON during the whole loading/unloading cycle. Otherwise the hydraulic pump may be damaged (for mobile ramps with hydraulic drive).

Prior to operation take off the shipping fasteners. Attention! During loading/unloading operation the ramp with hydraulic drive and ramp with support on the trailer bed automatically follows the trailer bed height fluctuation. The ramp without support on the trailer bed has a lip which follows the truck bed movement (maximum deviation from the horizon is ±100 mm).

DoorHan mobile yard ramps can only be used with forklifts having inflatable wheels. Don’t drive hydraulic trolleys and loaders with polyurethane wheels having high point load onto the ramp.

Additional Information print

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Warranty print

DoorHan warrants the shortened yard ramp to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.