Schwerlast-Stahlrolltore RH117 mit Wellenantrieb

Schwerlast-Stahlrolltore RH117 / RHS117P mit Wellenantrieb – Industrie-Kraftpakete

Die Schwerlast-Rolltore aus den Stahlprofilen RH117 und RHS117P mit Aufsteck-Wellenantrieb sind für anspruchsvolle gewerbliche Großöffnungen und kontinuierliche Betriebszyklen ausgelegt. Sie kommen in Logistikzentren, Industriehallen und Sammelgaragen zum Einsatz, an denen große Torabmessungen und intensive Nutzung zusammentreffen.

Der Behang wird wahlweise aus den geschlossenen Stahlprofilen RH117 oder den perforierten Lamellen RHS117P gefertigt. Die perforierte Variante ermöglicht die ständige Be- und Entlüftung von Garagenräumen unter Beibehaltung einer soliden physischen Schutzbarriere. Der kraftvolle externe Wellenantrieb greift direkt an der massiven Welle an und bewältigt hohe Behanggewichte zuverlässig im industriellen Dauereinsatz.

Eine integrierte Fangvorrichtung stoppt das Torblatt bei einem mechanischen Versagen zuverlässig ab. Optische Sensoren und Schließkantensicherungen stoppen die Schließbewegung bei Hinderniskontakt automatisch.

Häufig gestellte Fragen

Welchen Vorteil bietet der externe Wellenantrieb gegenüber Rohrmotoren?

Der Aufsteckantrieb ist für schwere Tore und hohe Einschaltdauern im Dauerbetrieb ausgelegt. Er ermöglicht zudem einen besonders wartungsfreundlichen Zugang bei Inspektionen.

Wo wird das perforierte Stahlprofil RHS117P eingesetzt?

Es kommt vor allem in Tiefgaragen und Parkhäusern zum Einsatz, in denen gesetzliche Vorgaben zur Entlüftung und Abgasabfuhr erfüllt werden müssen.

Application:

Entrance and garage openings

Warehouse and industrial openings

Order with installation

Design

Steel profiles

Standard colours

Additional colors

RHS117

RHS117P

White

Brown

Grey

Beige

Green

Blue

Burgundy

Silver

Galvanized

RAL 1007 Daffodil yellow

RAL 1015 Light ivory

RAL 1017 Saffron yellow

RAL 1019 Grey beige

RAL 3004 Red ruby

RAL 3020 Deep red

RAL 5011 Steel blue

RAL 6009 Spruce green

RAL 7016 Anthracite grey

RAL 7035 Graphite gray

RAL 8017 Chocolate brown

RAL 8019 Grey brown

RAL 9005 Dark black

Equipment

Standard

Optional

The blade on the shaft assembly consists of a shaft with capsules with a diameter of 102, 159, 273 mm, cutting a solid or perforated steel, galvanized profile with a height of 117 mm and a thickness of 0.9 mm. The canvas can be painted in any of the colors available for selection.

The end profile consists of an extruded aluminum profile RA120E with a wall thickness of 2.5 mm and a bottom seal UP4 or UP6 (for installing optosensors).

The set of guide profiles consists of two steel guides with a seal. The wall thickness of the guide profile is 2.5 mm. The guide profiles can be painted in any of the available colors.

Consoles can be of two sizes: 425 or 650 mm. Steel, galvanized.

The bulk electric drive is supplied with a set of brackets and hardware for mounting the drive and support with bearing.

Box with additional equipment.

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control

GSM module for receiving a signal from a mobile phone and transmitting a control command to start an electric drive or barrier

TRANSMITTER 4 remote control for remote control of four automatic devices

Key-button SWM (metal) for sending a control command to the electric drive control unit by turning the key

Safety photocells PHOTOCELL-N, consisting of an infrared transmitter and receiver

LED signal lamp with antenna LAMP-PRO

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

from 2,000 to 6,300

Opening width, mm

from 2,000 to 11,800

Headroom, mm

from 650

Sideroom clearance, mm

from 500

Maximum door curtain area, sqm

up to 50

Retaining ring RN30, RN40, RN55
Console SR425, SR650
Caliper with bearing BS30, BS40, BS55
Adjustable capsule KPU10230, KPU159, KPU273-55
Shaft RV102, RV159m, RV273m-55
Adjustable capsule with key KPU10230S. KPU159S, KPU273S-55
SR200 drive mounting bracket
Guide profile RG95S
Plug PB14
Side lock SLE117
Profile (canvas) RHS117, RHS117P
End profile RA120E
Shaft drive
Bottom seal UP4, UP6
Side seal UP5

Steel rolling doors made of solid RHS117 profile

Steel rolling doors made of perforated RHS117P profile

Steel rolling doors made of solid and perforated profiles

Parameter	Value	Notes
	Solid steel profile RHS117	Industrial rolling gates made of steel profiles with a bulk drive
Material	Galvanized steel 0.9 mm thick	The design has a burglary resistance class P4-P5 and fire safety class K0
Slats weight, kg/rmt	1.36
Slats weight, kg/sqm	11.61
Number of slats per 1 m of curtain height, pcs	8.54
Maximum door curtain width, m	11.8
Maximum door curtain area, sqm	50
	Perforated steel profile RHS117P	Industrial rolling gates made of steel profiles with a bulk drive
Material	Galvanized steel 0.9 mm thick	The design has a burglary resistance class P4-P5 and fire safety class K0
Slats weight, kg/rmt	1.2
Slats weight, kg/sqm	10.25
Number of slats per 1 m of curtain height, pcs	8.54
Maximum door curtain width, m	11.8
Maximum door curtain area, sqm	50

Properly installed and operated roller shutters guarantee reliable and durable operation. To extend the life of your rolling gates, follow these instructions:

1. Installation of the product must be carried out strictly in accordance with the installation instructions for rolling gates and technical documentation of the DoorHan company.

2. Rolling gates should open smoothly without jerking or jolting.

3. To raise and lower structures, use only controls designed for this purpose.

4. Partial raising or lowering of the rolling shutter leaf is not recommended, especially for large structures.

5. If a mechanical lock is used in the design, lifting the blade when the lock is closed is prohibited.

6. When using an automatic drive, follow the instructions supplied with the drive.

7. Keep children away from roller shutter control devices (buttons, remote controls).

8. Make sure that people and animals are not within the range of the roller shutter when it is opening or closing.

9. It is strictly prohibited to be under the structure during its operation, because this may cause injury.

10. Do not subject the rolling gate to impacts or interfere with its free opening and closing.

11. Make sure that there are no foreign objects in the opening while moving the roller shutter leaf, as this may lead to damage to the structure.

12. It is prohibited to install additional equipment or accessories, as well as to independently replace or adjust individual parts, without consultation with the manufacturer (consultation is considered to be a request that contains a clear description of the problem that has arisen, which can be documented).

13. In winter, in case of icing of parts of the roller gate structure, before raising and lowering the door leaf, it is necessary to first tap the door leaf along the contour until it is completely free of ice and foreign objects, paying special attention to the condition of the junction of the bottom strip of the product with the floor (they are also must be cleaned).

14. If roller shutters are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.

15. Diagnostics and repair of rolling gate structures or roller gates should be carried out only by qualified specialists.

16. It is necessary to carry out regular maintenance of roller shutters, at least once a year.

Packing in bubble wrap	Packaging features
	All gate equipment is supplied packed in bubble wrap and placed on a special wooden pallet
Length, mm	Depends on the length of the door components

Packing in wood	Packaging features
Description	Bubble film, wood pallet, wood blocks, plywood
Height, mm	650
Width, mm	680
Length, mm	Depends on the length of the door components

Additional Information print

Especially for these gates, the DoorHan concern has developed a vandal-proof steel profile of increased rigidity with a degree of burglary resistance P4-P5 and fire safety K0.

Installation

Mounting Options

Checking Dimensional Details

Overlay installation. For surface-mounted installation, labor-intensive preparation of the opening is not required, only the required dimensions of the walls (from 500 mm) and the lintel (from 650 mm). With the overhead type of installation of rolling gates, a shaft with a roller blade and consoles with a shaft electric drive are installed above the opening, and guide profiles are installed on both sides of it. The closed roller gate completely covers the opening and is almost flush with the surface of the walls.

Measuring parameters for surface mounting:
H — opening height (max), mm;
B — opening width (max), mm;
h — lintel height (min), mm; b1 and b2 — right and left lateral distances (min), mm.
To take measurements, you must use a tape measure and a building level, or electronic measuring instruments. It is recommended to measure each parameter at a minimum of three points.
Prepared openings must meet the following requirements: openings must be rectangular in shape; the surface of the opening planes must be flat and smooth, without sagging plaster and cracks; the wall must be monolithic, without voids (concrete, metal, solid brick); if the brick is hollow, it is recommended to edge the opening with a metal corner; the internal and external planes of the walls at the junction of structures must be smooth, without protrusions and depressions; deviations of working surfaces from vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm, the difference in diagonals should not exceed 5 mm.

Warranty print

The buyer is provided with a performance guarantee for rolling gates produced by the DoorHan concern for two years from the date of purchase of this product.

New Products

All rolling gates are packed in an individual wooden box.