Mineral wool board DOORHAN “FACADE OPTIMA”

DOORHAN "FACADE OPTIMA" mineral wool slabs are used as a heat-insulating layer in external insulation systems for building facades, followed by thin-layer plastering using an alkali-resistant reinforcing mesh or plastering over a steel reinforcing mesh.

Application:

Facade systems with a thick plaster layer
Facade systems with a thin plaster layer

Order with installation

Advantages

The excellent heat-insulating properties of mineral wool significantly reduce heat loss.

Hydrophobic impregnation of cotton wool forms a film on its surface, which prevents the penetration of liquid inside, while not blocking the natural circulation of air.

Optimum vapor permeability of cotton wool eliminates the formation of fungus and mold on the inner walls of the plate.

Mineral wool is a non-combustible material and helps to maintain the integrity of the building in the event of a fire.

The excellent heat-insulating properties of mineral wool significantly reduce heat loss.

Hydrophobic impregnation of cotton wool forms a film on its surface, which prevents the penetration of liquid inside, while not blocking the natural circulation of air.

Optimum vapor permeability of cotton wool eliminates the formation of fungus and mold on the inner walls of the plate.

Mineral wool is a non-combustible material and helps to maintain the integrity of the building in the event of a fire.

Technical description

Size Table

Specifications

Packaging

Parameters

Value

Length, mm

1 200

Width, mm

600

Thickness, mm

from 40 to 160 in 10 mm increments

Packaging volume, m³

from 0.108 to 0.202 (depending on plate thickness)

Parameter	Value	Notes
Density, kg/m³	135
Thermal conductivity, W/(m K), not more than at a temperature of 10 ˚С	λ10 = 0,037	at a temperature of 10 ˚С (283±1) K, no more
Thermal conductivity, W/(m K)	λ25 = 0,039	at a temperature of 25 ˚С (298±1) K, no more
Thermal conductivity, W/(m K)	λА = 0,040	calculated for operating conditions A and B according to SP 50-13330-2012, no more
Thermal conductivity, W/(m K)	λБ = 0,042	calculated for operating conditions A and B according to SP 50-13330-2012, no more
Compressive strength, kPa	45	for compression at 10% relative deformation, not less than
Tensile strength, kPa	15	when stretched perpendicular to the front surfaces, not less than
Water absorption, kg/sqm	1,0	with short-term partial immersion, no more
Content of organic substances, %	4,5	by weight, no more
Humidity, %	0,5	by weight, no more
Vapour permeability, mg/m·h·Pa	0,5	no more
Combustibility class according to European Standards	NG

Packing on pallet	Packaging features
Description	The boards are packed in a thermo shrinkable polyethylene film. The packs are stacked on a pallet and additionally protected by a plastic bag. Each package is labeled with product information.
Length, mm	2 400
Width, mm	1 200
Height, mm	2 505

Warranty print

If the consumer maintains the rules of transportation and storage, the warranty shelf life of the plates is six months from the date of manufacture.