Überladebrücken Serie DS mit Vorschub

Überladebrücke Serie DS mit Vorschub – Robuste Industrie-Verladebrücke

Die elektrohydraulische Überladebrücke der Serie DS ist für den intensiven Güterumschlag an gewerblichen Logistikzentren und Industrieanlagen konzipiert. Ausgestattet mit einem ausfahrbaren Vorschub ermöglicht die Brücke das gezielte Überbrücken des Abstands zwischen Laderampe und LKW-Aufbau.

Der Vorschub lässt sich stufenlos nach vorne ausfahren und auf der Ladefläche des Fahrzeugs positionieren. Die gesamte Plattform und die Teleskoplippe bestehen aus robustem Tränenblech, das Flurförderzeugen eine griffige Lauffläche bietet. Während des Umschlagvorgangs folgt die Brücke flexibel den Einfederungsbewegungen des beladenen Fahrzeugs.

Die Steuerung der hydraulischen Arbeitszyklen erfolgt über ein wandmontiertes Bedientableau. Seitliche Schutzabdeckungen schützen den Spaltbereich während der Hebe- und Senkbewegungen.

Häufig gestellte Fragen

Wie funktioniert der Vorschub bei der Serie DS?

Der Vorschub wird über einen separaten Hydraulikzylinder nach vorne ausgefahren und legt sich flach auf den Boden der LKW-Ladefläche.

Welche Oberflächenbeschaffenheit weist die Serie DS auf?

Plattform und Vorschub bestehen aus rutschhemmendem Tränenblech für den sicheren Fahrbetrieb mit Gabelstaplern.

Application:

Warehouses and factories

Order with installation

Design

Colour Options

RAL 9005 Jet black

RAL 5005 Signal blue

Equipment

Standard

Optional

Dock leveler

Connecting cable for control unit

Side weather seal

DCUT-1 control unit. Standard. 400V 3 phase power supply. Operates a dock leveler via a constant-pressure push-button. Returs the dock leveler to stored position via a constant-pressure push-button. Blocks the dock leveler when the door is closed.

DCUT-2 control unit. With advanced functions. 400V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display.

DCUT-3 control unit. Complex control panel which operates various combinations of loading dock equipment. 400V 3 phase power supply. Operates the dock leveler via a constant-pressure push-button. Returns the dock leveler to stored position via one pressure of AUTO button. Blocks the dock leveler when the door is closed. Can be connected to indoor and outdoor traffic lights. Lights at platform area. Maintenance service indicator. Digital display. Controls overhead door operator. Controls inflatable dock shelter.

Photo electric sensor. Interlocks the dock leveler and sectional doors. The sensor blocks the dock leveler control when the door is closed to prevent its damage.

Wheel guides. They are used to direct reversing vehicles safely and quickly on to the loading docks thus preventing damages to dock shelters or the building. The guides are designed to minimise possible contact with the truck wheel rim. They are made of steel tubes with 159 mm diameter and positioned in front of the loading bay. These wheel guides are fixed to the surface with anchor bolts or embedded into a concrete foundation.

Safety fences. Fences are placed inside the premise to protect the walls from collisions with forklifts, ensuring correct and safe movement of the vehicle inside the premises and near the loading dock. Fences are made of steel tubes of 100–159 mm diameter, may have any design and be manufactured in accordance with customer’s orders.

Shock columns. Designed to prevent forklifts from damaging vertical angles of sectional doors used in loading docks. Shock columns are installed inside the premise in front of the door vertical angle. Available in any diameter from 100 to 159 mm.

Traffic lights Traffic-light-LED. Help manage safe traffic of trucks and forklifts during departures/entries and loading operations. Can be connected to control units of DCUT-2, DCUT-3 series.

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450×250×100. Ensure safe truck movement reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510×250×330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 610 × 250 × 175. (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM610 × 250 × 175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. Can be used only with dock leveler with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600 × 364 × 110. Moves up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. This dock bumper is used together with parking radar. For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 500 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS500×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings.

Steel face dock bumpers 800 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS800×255×205.It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings.

LED dock light is used to illuminate the loading dock.

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Parameters

Value

Length of dock leveler with load capacity of 6 000 kg (60 kN)*, mm

2 500; 3 000; 3 500; 4 000

Length of dock leveler with load capacity of 10 000 kg (100 kN)*, mm

2 500; 3 000; 3 500; 4 000

Dock leveler width, mm

2 000; 2 200; 2 400

Front PVC curtain
Lip
Lip cylinder
Lifting cylinder
Hydraulic pump
Deck
Frame
Signal black and yellow stripes
Control unit

Standard lip 500 mm. 35 mm bevel. Whole rectangular lip for trucks with one-size load bed.

Lip 1 000 mm. 35 mm bevel. Elongated whole rectangular lip for trucks with one-size load bed. Applied when standard length lip is not enough or when overhead door of heated loading dock shuts in front of the leveler closing the thermal contour of the building.

Segmented lip. 35 mm bevel. Has three segments. Sliding out entirely it allows using only central or central and side segments with trucks whose load bed is narrower than the standard one. Applicable only with 6 000 kg capacity levelers.

Segmented lip. 35 mm bevel. Has five segments. Sliding out entirely it allows using only central or central and one to four side segments with trucks whose load bed is narrower than the standard one. Applicable only with 6 000 kg capacity levelers.

Wedge-shaped lip. 35 mm bevel. Whole, without segments. Such levelers are ideal for trucks with different-size load beds or in case a truck parks not in the center of the loading dock preventing truck damage.

Lip without bend. 35 mm bevel. Whole, without segments. Rectangular lip ideal for trucks with one-size load bed and loaders with low or very low clearance.

Parameter	Value	Notes
Length, mm	2 500; 3 000; 3 500; 4 000
Weight, kg	1 000; 1 100; 1 200; 1 350
Load capacity, kg (kN)	6 000 (60); 10 000 (100)
Maximum point load, Н/mm²	1,3	8 mm top sheet
Maximum point load, Н/mm²	6,5	10 mm top sheet
Power, W	1 100	hydraulic pump electric drive
Supply voltage, V	380, 3 phase
Supply voltage, V	24
IP protection class	IP54
Preparation of steel surface before application of paints, class	Sa 2
Thickness of paint layer, not less than, mkm	60
Operating temperature range, °С	from -30 to +50
Number of lifting cylinders, pcs.	2
Hydraulic fluid	Mobil DTE10 EXCEL

Conduct routine inspections and maintenance of the dock leveler to ensure its safe and smooth operation.

Keep people and goods clear of working area while operating the dock leveler.

Keep overhead door fully open while operating the dock leveler.

Make sure the vehicle is properly parked against the dock bumpers. Chock the wheels if needed.

Do not drive on the leveler unless the lip is securely positioned on the truck bed and has a minimum of 100 mm overlap on its surface.

Ensure that the control unit location allows operator to clearly see and control dock leveler operation.

Use dock levelers with 1,3 Н/mm² point load only with standard forklifts having inflatable wheels.

Use dock levelers with 6,5 Н/mm² point load with loading machinery having high point load, including electric stackers, pallet carriers, reach trucks, order picking stackers on polyurethane wheels.

Additional Information print

Lifting equipment:

forklift truck (minimum load capacity — 35 kN, fork length — not less than 2 000 mm);

crane (minimum load capacity — 20 kN).

Mounting equipment:

welding machine (5–200 A);

3 mm welding electrodes.

Installation

Mounting Options

Checking Dimensional Details

Embedded mounting

Suspended mounting

Pits for dock levelers are prepared in accordance with DoorHan drawings and correspond to dock leveler’s type and mounting.

Warranty print

DoorHan warrants the dock leveler with lip to operate properly for a period of 2 years from purchase date for retail and dealer orders.

New Products

Control unit was equipped with a plug to provide mains connection.

Design

Colour Options

RAL 9005 Jet black

RAL 5005 Signal blue

Equipment

Standard

Dock leveler

Connecting cable for control unit

Side weather seal

Optional

Photo electric sensor. Interlocks the dock leveler and sectional doors. The sensor blocks the dock leveler control when the door is closed to prevent its damage.

Traffic lights Traffic-light-LED. Help manage safe traffic of trucks and forklifts during departures/entries and loading operations. Can be connected to control units of DCUT-2, DCUT-3 series.

LED dock light is used to illuminate the loading dock.

Technical description

Size Table

Parameters

Value

Length of dock leveler with load capacity of 6 000 kg (60 kN)*, mm

2 500; 3 000; 3 500; 4 000

Length of dock leveler with load capacity of 10 000 kg (100 kN)*, mm

2 500; 3 000; 3 500; 4 000

Dock leveler width, mm

2 000; 2 200; 2 400

Construction

Front PVC curtain
Lip
Lip cylinder
Lifting cylinder
Hydraulic pump
Deck
Frame
Signal black and yellow stripes
Control unit

Standard Construction

Standard lip 500 mm. 35 mm bevel. Whole rectangular lip for trucks with one-size load bed.

Lip without bend. 35 mm bevel. Whole, without segments. Rectangular lip ideal for trucks with one-size load bed and loaders with low or very low clearance.

Specifications

Parameter	Value	Notes
Length, mm	2 500; 3 000; 3 500; 4 000
Weight, kg	1 000; 1 100; 1 200; 1 350
Load capacity, kg (kN)	6 000 (60); 10 000 (100)
Maximum point load, Н/mm²	1,3	8 mm top sheet
Maximum point load, Н/mm²	6,5	10 mm top sheet
Power, W	1 100	hydraulic pump electric drive
Supply voltage, V	380, 3 phase
Supply voltage, V	24
IP protection class	IP54
Preparation of steel surface before application of paints, class	Sa 2
Thickness of paint layer, not less than, mkm	60
Operating temperature range, °С	from -30 to +50
Number of lifting cylinders, pcs.	2
Hydraulic fluid	Mobil DTE10 EXCEL