Mineral wool board DOORHAN “FACADE”

DOORHAN "FACADE" mineral wool slabs are used as a heat-insulating layer in systems for external insulation of building facades, followed by thin-layer plastering using an alkali-resistant reinforcing mesh or plastering over a steel reinforcing mesh.

Application:

Facade systems with a thick plaster layer
Facade systems with a thin plaster layer

Order with installation

Advantages

Allows to carry out installation of plates with the most dense prileganiye to each other.

The resistance of cotton wool to the action of solvents and oils allows it to be safely used with any building materials.

Mineral wool is a non-combustible material and helps to maintain the integrity of the building in the event of a fire.

Allows the use of mineral wool without shrinkage throughout the entire service life.

Allows to carry out installation of plates with the most dense prileganiye to each other.

The resistance of cotton wool to the action of solvents and oils allows it to be safely used with any building materials.

Mineral wool is a non-combustible material and helps to maintain the integrity of the building in the event of a fire.

Allows the use of mineral wool without shrinkage throughout the entire service life.

Technical description

Size Table

Specifications

Packaging

Parameters

Value

Length, mm

1 200

Width, mm

600

Thickness, mm

from 40 to 160 in 10 mm increments

Packaging volume, m³

from 0.094 to 0.18 (depending on board thickness)

Parameter	Value	Notes
Density, kg/m³	150
Thermal conductivity, W/(m K), not more than at a temperature of 10 ˚С	λ10 = 0.039	at a temperature of 10 ˚С (283±1) K, no more
Thermal conductivity, W/(m K)	λ25 = 0.040	at a temperature of 25 ˚С (298±1) K, no more
Thermal conductivity, W/(m K)	λА = 0.041	calculated) for operating conditions A and B according to SP 50-13330-2012, no more
Thermal conductivity, W/(m K)	λБ = 0.042	calculated) for operating conditions A and B according to SP 50-13330-2012, no more
Compressive strength, kPa	50	for compression at 10% relative deformation, not less than
Tensile strength, kPa	15	when stretched perpendicular to the front surfaces (separation of layers), not less than
Water absorption, kg/sqm	1,0	with short-term partial immersion, no more
Content of organic substances, %	4,5	by weight, no more
Humidity, %	0,5	by weight, no more
Vapour permeability, mg/m·h·Pa	0,5	no more
Combustibility class according to European Standards	NG

Packing on pallet	Packaging features
Description	The boards are packed in a thermo shrinkable polyethylene film. The packs are stacked on a pallet and additionally protected by a plastic bag. Each package is labeled with product information.
Length, mm	2 400
Width, mm	1 200
Height, mm	2 505

Warranty print

If the consumer maintains the rules of transportation and storage, the warranty shelf life of the plates is six months from the date of manufacture.