DSHINF series inflatable sealer

The DSHINF series inflatable opening shelter is installed in cases where it is especially important to maintain temperature conditions, for example, at the shipping docks of freezer warehouses. During work, the car body partially drives inside the seal. The top and side airbags are inflated, providing a high seal between the vehicle body and the building. Upon completion of the work, the cushions are deflated.

Application:

Warehouses, cold storage, food manufacturing plants

Order with installation

Advantages

Maximum isolation

The inflatable design of the top and side cushions provides the highest degree of insulation.

Versatile application

The working extension of the top cushion can be 900 or 1200 mm for the use with different types of vehicles.

Convenient to control

The inflatable shelter can be controlled from the leveling platform control panel.

Resistant

For the manufacture of pillows, wear-resistant Cordura material is used, which has sufficient elasticity and has a high tear resistance.

Maximum isolation

The inflatable design of the top and side cushions provides the highest degree of insulation.

Versatile application

The working extension of the top cushion can be 900 or 1200 mm for the use with different types of vehicles.

Convenient to control

The inflatable shelter can be controlled from the leveling platform control panel.

Resistant

For the manufacture of pillows, wear-resistant Cordura material is used, which has sufficient elasticity and has a high tear resistance.

Equipment

Standard

Optional

Side airbag

Front airbag

Top airbag extension 1 200 mm

Wheel guides

Safety fences

Shock column

Molded rubber bumpers 250 × 250 × 100 mm. Standard. Product number BR250 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 450 × 250 × 100 mm. Standard. Product number BR450 × 250 × 100. Ensure safe truck reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 510 × 250 × 330 mm (external dimensions), console type. Based on rubber bumper 450 × 250 × 100 mm. Product number BRC510х250х330. Ensure safe truck reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 610 × 250 × 175. (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM610×250×175. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. Can be used only with dock leveler with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Molded rubber bumpers 600 × 364 × 110 mm (external dimensions), moving. Based on rubber bumper 450 × 250 × 100 mm. Product number BRM600×364×110. Moves up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Have greater service life. Can be used only with dock levelers with 1 000 mm telescopic lip. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 465 × 250 × 165 mm (external dimensions) with 16 mm steel plate and parking sensor. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(16)465×250×165S. Consists of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate and parking sensor. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. These dock bumpers are used together with parking radar. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 460 × 250 × 160 mm (external dimensions) with 10 mm steel plate. Based on rubber bumper 450 × 250 × 100 mm. Product number BRSP(10)460×250×160. Consist of a rubber bumper 450 × 250 × 100 mm covered with durable steel plate. For mounting dimensions, please, refer to drawings

Steel face dock bumpers 500 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS500×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Steel face dock bumpers 800 × 255 × 205 (external dimensions) with damper insert. Based on rubber bumper 450 × 250 × 100 mm. Product number BS800×255×205. It’s a hybrid device combining moving bumper and steel plate bumper. Consist of a holder, a rubber crumb damper insert and a moving steel plate following truck bed movement. Steel face improves life expectancy of the rubber bumper and protects it from damaging by parking vehicle and during loading/unloading cycle. Manufacturer’s warranty doesn’t cover steel plate replacement in case of wear and deformation due to its extreme abnormal wear. Can be used only with dock leveler with 1 000 mm telescopic lip For mounting dimensions, please, refer to drawings

Technical description

Size Table

Construction

Specifications

Operating Conditions

Parameters

Value

Height, m

3 300; 3 800; 4 900

Width, m

3 410; 3 610

Dock shelter body (two sides and top)
Blower
Blocks of counterweight
Counterweight
Side airbag
Front protection curtain
Counterweight shaft
Top airbag

Parameter	Value	Notes
Length, mm	800
Width, mm	0,9
Panel colour	RAL 9003 (Signal white)
Profiles colour	RAL 9006 (White aluminium)
Colour	Black
Control	Switch

Prior to operation carefully inspect the dock shelter. Never use it in case any damage found.

Position the trailer in the middle of the dock shelter so that the distances between trailer’s body and shelter sides are equal on both sides. Back the trailer slowly till it presses dock bumpers.

Make sure the truck is stationary, the handbrake is put on, the wheels are choked.

Switch the blower on by pressing a push-button on the control unit. In 30 seconds the dock shelter will be inflated and will tightly wrap the truck body.

Switch the blower off after loading/unloading operations are completed. The trailer should exit the loading dock only after air bags are completely stored.

Attention! The blower should be on during whole loading/unloading cycle.

Installation

Checking Dimensional Details

Warranty print

DoorHan warrants the inflatable dock shelter to operate properly for a period of 2 years from purchase date for retail and dealer orders.