Schnelllauf-Rolltor SPEEDROLL SDO | Robust für den Außenbereich

Schnelllauf-Rolltor SPEEDROLL SDO: Die robuste Lösung für den Außenbereich

Das Schnelllauf-Rolltor der Serie SPEEDROLL SDO ist unsere spezialisierte Lösung für den Einsatz als Außentor. Es wurde entwickelt, um den rauen Bedingungen an der Gebäudehülle standzuhalten und gleichzeitig die Vorteile eines Hochgeschwindigkeitstores zu bieten. Es schließt Ihre Halle sicher gegen Witterungseinflüsse ab und ist die ideale Wahl für Logistikzentren und Industriehallen mit hohem Staplerverkehr nach draußen.

Die extrem hohe Öffnungs- und Schließgeschwindigkeit minimiert die Offenhaltezeiten der Fassade. Dies senkt Ihre Energiekosten drastisch, da im Winter kaum Wärme entweicht und im Sommer die Hitze draußen bleibt.

Die Vorteile der SPEEDROLL SDO-Serie:

Hohe Windbeständigkeit: Die Konstruktion und der Behang sind speziell verstärkt, um auch höheren Windlasten an der Außenseite des Gebäudes standzuhalten.
Effiziente Energietrennung: Die rasante Geschwindigkeit und der dichte Abschluss reduzieren den Energieverlust und schützen effektiv vor Zugluft.
Witterungsbeständig und Langlebig: Alle Komponenten sind auf Langlebigkeit ausgelegt und widerstandsfähig gegen Regen, Wind und UV-Strahlung.
Integrierte Sicherheit: Ein serienmäßiges Lichtgitter oder eine Schließkantensicherung sorgt für den Schutz von Personen und Fahrzeugen im Torbereich.

Application:

Warehouse complexes. Industrial facilities

Order with installation

Advantages

High speed gate

High opening speed — up to 2.0 m/s.

Possibility of automation

Reliable automation of our own production.

Additional options

Possibility of installing various additional equipment: photocells, key buttons, drive and rack heating systems, etc.

Frost resistance

Stable operation at significant negative temperatures.

Extended basic equipment solution

A set of safety devices as standard.

High speed gate

High opening speed — up to 2.0 m/s.

Possibility of automation

Reliable automation of our own production.

Additional options

Possibility of installing various additional equipment: photocells, key buttons, drive and rack heating systems, etc.

Frost resistance

Stable operation at significant negative temperatures.

Extended basic equipment solution

A set of safety devices as standard.

Design

Surface type

Frame colors

Door frame – zinc-coated steel, unpainted

Door frame – ASIS 304 stainless steel

RAL 9010 Pure white

RAL 5002 Ultramarine blue

RAL 6026 Opal green

RAL 9006 White aluminium

RAL 1003 Signal yellow

RAL 3002 Carmine red

RAL 2004 Pure orange

Equipment

Standard

Optional

Tracks and track covers made of zinc-caoated steel

Zinc-caoated shaft, diameter 90/130 mm

Guide rails — extruded polyethylene

Door curtain — nontransparent reinforced PVC with density of 900–1 200 g/sqm

Control unit — painted steel body 300 х 400 х 150 mm; protection class — IP54; with frequency converter

Photocells are installed at 500 mm above the floor level, and at the top of side tracks to detect incorrect unwinding of the curtain

Control unit housing made of AISI304 stainless steel.

Heating of the drive and tracks

When closing, if the sensitive lower edge touches an obstacle, the sensor sends a signal via radio to the control unit to open the gate; In the event of a power failure, the gate opens automatically using a counterweight.

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening width, mm

1,200–5,700

Opening height, mm

1,800–5,800

Headroom, mm

From 450

Sideroom clearance, mm

From 225

Electric drive
Shaft
Shaft box
Gate leaf
Transparent insert (window/panel)
Stand
Guide for moving the web
Bottom edge of the canvas
Photocell
Control unit
Counterbalance

General view of a gate with a drive from the side (drive on the left/drive on the right).

Symbol, parameter name	Calculation formula
H, mm Opening height	1,600–5,700
B, mm Opening width	1,800–5,800

General view of a gate with a drive from the front (front left/front right).

Symbol, parameter name	Calculation formula
H, mm Opening height	1,600–5,700
B, mm Opening width	1,800–5,800

Parameter	Value	Notes
Wind load, Pa	CLASS1 (up to 82)	For gates up to 6,000 × 6,000 mm
Wind load, Pa	CLASS2 (up to 90)	For gates up to 5,000 × 5,000 mm
Opening speed, m/s	2.0	For gates up to 3,000 × 3,000 mm
Opening speed, m/s	1.5	For gates up to 5,000 × 5,000 mm
Opening speed, m/s	1.0	For gates up to 6,000 × 6,000 mm
Closing speed, m/s	0.5
Operating temperature range, °С	-30...+50	When using the rack and drive heating system; when operating in a temperature range of -16...-30 °C, the gate design does not have reinforcement on the leaf, and transparent sections cannot be installed: the “Security Profile” option is not available
Power, W	1,500
IP protection class	IP54	End positions are tracked by encoder
Supply voltage, V	220 V / 50 Hz	Single phase
Supply voltage, V	380 V / 50 Hz	Three-phase
Number of cycles	1,500,000	Depends on operating conditions
Wind load, Pa	CLASS3 (up to 120)	For gates up to 3,000 × 3,000 mm

Wind load resistance for SpeedRoll series doors is given for the door in the closed position. Gates are not used in places with unstable and increased wind loads caused by natural or man-made factors, such as:
- buildings located on sea coasts or in the mountains;
- multi-level heated underground parking lots with multiple entrances and exits;
- production with powerful supply and exhaust ventilation;
- in buildings of complex configuration with many gate openings, where strong drafts may occur. If one or more of the above factors are present, it is recommended to use a SpeedFold series door or a HSSD series spiral door.

To ensure reliable and uninterrupted operation of the gate, it is recommended to carry out regular technical inspection and maintenance.

Manual opening and closing of the gate is done using a crank.

Do not subject the gate to impacts or interfere with its free opening and closing.

Do not allow the PVC sheet guide to get dirty.

It is prohibited to stand in the opening while the gate is opening and closing to avoid injury.

Make sure that there are no foreign objects in the opening when opening and closing the gate.

For gates installed outside the building and used at temperatures below -15 °C, operation of the door leaf with windows is not allowed.

The self-healing function of the door leaf in the guides is used to operate the gate in emergency conditions, in the event of an unintentional collision with a vehicle; it is not intended to work when the door leaf is deliberately and systematically knocked out of the guides. The functionality of the function is ensured by the possibility of the “zipper”, installed on the door leaf from plastic guides, coming out. The functionality of the function cannot be ensured in the event of impacts that exceed the strength parameters of the individual components of the web and system elements. For example, in the event of a collision with a road surface at high speed, impacts with sharp objects, impacts on the top of the gate with raised forks of a forklift, etc.

Packing in wood	Packaging features
Contents	The packaging is a wooden box made of timber, cardboard is laid between the nodes, everything is secured with clamps
Length, mm	Depends on the length of the gate components
Width, mm	640–705
Height, mm	480–730

Additional Information print

The DoorHan concern loads gates onto trucks using a hydraulic crane or forklift with a fork of at least 2 m. The buyer or installer must provide the same equipment for moving the packaged gates. The plug should fit under the wooden pallet provided by the manufacturer and protrude from the other side. When using a crane or other lifting equipment, it is recommended that you use slings of adequate lifting capacity.

Installation

Checking Dimensional Details

All measurements are taken indoors. Each value must be measured at at least three points (in extreme positions and in the center).
B – opening width (distance from the left edge to the right edge of the opening).
H – opening height (distance from the floor to the top of the opening).
h – lintel (distance from the top of the opening to the ceiling).
b1/b2 – left/right lateral distance (distance from the corresponding edge of the opening to the obstacle).
When measuring H and B, the largest value is taken as the final size; when measuring h, b1 and b2, the smallest value is taken.

Warranty print

The buyer is provided with a performance guarantee for high-speed rolling gates produced by the DoorHan concern for a period of 1 year for retail and for a period of 2 years for dealer orders from the date of purchase.

New Products

DoorHan SERVO drive (220 V).