Überladebrücke mit Vorschub, Konsolentyp, Serie DSMC

Leveling platform

Connection for control unit

Side seal

Control unit DCUT-1. Basic. Power supply 380 V 3 phases. The platform is controlled by holding the button. Return to the parking position by holding the button. Blocking the platform when the gate is closed.

Control unit DCUT-2. With extended functions. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display.

DCUT-3 control unit. A complex device for controlling the elements of the reloading dock. Power supply 380 V 3 phases. The platform is controlled by holding the button. Automatic return to the parking position by pressing the AUTO button once. Blocking the platform when the gate is closed. Possibility to connect an external/internal traffic light. Platform lighting. Maintenance indicator. Digital display. Gate drive control. Inflatable dock control.

Photoelectric sensor. Designed for interlocking platforms and sectional doors. When the gate is closed, the sensor blocks the platform control to avoid damage to the door.

The wheel guides are designed to ensure fast and accurate parking of the vehicle in the dock and to protect dock shelters and building walls from damage. The guides are designed to minimize possible contact with the vehicle wheel rim. They are steel pipes with a diameter of 159 mm with taps for fastening. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized. Guides are installed on the site in front of the dock in two ways - on anchor bolts and with the help of concreting.

Fences are installed inside the building and are designed to protect the walls of the building from damage by a forklift. They ensure the correct and safe movement of the forklift through the warehouse and when approaching the dock. Fences are round pipes with a diameter of 100-159 mm, in addition, they can have an arbitrary shape and be made according to the customer's sketches. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Fender posts are designed to protect the corner posts of the gate from damage in the event of a collision with a forklift. The posts are installed indoors in front of the racks. The diameter of the baffle column is from 100 to 159 mm. The basic color is RAL2004, it is also possible to paint in any color according to the RAL card or hot-dip galvanized.

Frame for concreting. It is made in accordance with the mounting dimensions of the leveling platform.

Traffic light TRAFFICLIGHT-LED. It is designed to ensure the safe movement of a truck and a loader at the time of approach / departure and the loading process. Can be connected to DCUT-2, DCUT-3 series control units.

Article "BR250x250x100". Base. Rubber bumper 250 × 250 × 100 mm. Provides a safe truck access to the loading area and prevents damage to the walls of the building. For installation dimensions, see the Drawings section.

Article "BR450x250x100". Base. Rubber bumper 450 × 250 × 100 mm. Provides a safe truck access to the loading area and prevents damage to the walls of the building. For installation dimensions, see the Drawings section.

Article "BRC510x250x330". Built on the basis of a 450 × 250 × 100 mm bumper. Rubber bumper 510 × 250 × 330 mm (external dimensions) cantilever type. Provides a safe truck access to the loading area and prevents damage to the walls of the building. It is used when the height of the car body can be greater than the height of the ramp. For installation dimensions, see the Drawings section.

Article "BRM610x250x175". Built on the basis of a 450 × 250 × 100 mm bumper. Rubber bumper 610 × 250 × 175 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to mobility. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the Drawings section.

Article "BRM600x364x110". Built on the basis of a bumper 450 × 250 × 100 mm. Rubber bumper 600 × 364 × 110 mm (external dimensions) movable. Follows the up and down movements of the truck when loading/unloading. It has significantly greater wear resistance due to mobility. For installation dimensions, see the "Drawings" section.

Article "BRSP (16) 465x250x165". Built on the basis of a 450 × 250 × 100 mm bumper. Bumper 465 × 250 × 16 mm (external dimensions) with 16 mm thick steel working pad. It consists of a filler that is shock-absorbing over the entire surface (rubber bumper 450 × 250 × 100 mm), closed with a strong external steel plate. Protective lining on the bumper is used to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. For installation dimensions, see the Drawings section.

Article "BRSP (16) 465x250x165S". Built on the basis of a 450 × 250 × 100 mm bumper. Bumper 465 × 250 × 165 mm (external dimensions) with 16 mm thick steel working pad and parking sensor. It consists of a shock-absorbing filler over the entire surface (rubber bumper 450 × 250 × 100 mm), covered with a strong external steel plate and a parking sensor that ensures safe docking of a truck. Protective lining on the bumper is used to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Used in a system with a parking radar. For installation dimensions, see the Drawings section.

Article "BS500x255x205". Built on the basis of a bumper 450 × 250 × 100 mm. Steel bumper 500 × 255 × 205 mm (external dimensions) with damper insert. It is a hybrid bumper, which is a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumb and a movable, durable outer steel cover that can move following the movements of the car body. The metal case on the bumper serves to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading operations. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the "Drawings" section.

Article "BS800x255x205". Built on the basis of a bumper 450 × 250 × 100 mm. Steel bumper 800 × 255 × 205 mm (external dimensions) with damper insert. It is a hybrid bumper, which is a combination of a movable bumper and a bumper with a metal plate. It consists of a holder, a damping insert made of rubber crumb and a movable, durable outer steel cover that can move following the movements of the car body. The metal case on the bumper serves to increase the service life and protect the rubber bumper from damage when parking the car and during loading and unloading operations. This part is subject to rapid natural wear and is not eligible for warranty replacement due to wear and tear. Can only be used with platforms with a 1000 mm retractable lip. For installation dimensions, see the "Drawings" section.

LED lamp with dock lighting bracket.