External farm series FEH, FET

Remote trusses of the FEH and FET series are designed for installing leveling platforms outside the building. They are installed on open ramps or opposite gate openings where it is not possible to make a pit in the warehouse floor for a dock leveler. One of the advantages of remote trusses is the ability to modernize them without changing the design of the main building.

Application:

Warehouse area

Order with installation

Advantages

Installation outside of the warehouse saves space inside.

The design allows to use leveling platforms with rotary and retractable ramps.

The simplicity of the design and the supply of pre-assembled units ensure a quick installation of the truss.

Possibility of modernization without rebuilding the main building.

Installation outside of the warehouse saves space inside.

The design allows to use leveling platforms with rotary and retractable ramps.

The simplicity of the design and the supply of pre-assembled units ensure a quick installation of the truss.

Possibility of modernization without rebuilding the main building.

Design

Surface type

Colours

Diamond plate

RAL 9005 Jet black

RAL 5005 Signal blue

Equipment

Optional

Wheel guides

Shock column

Molded rubber bumpers 250х250х100 mm. Standard. Product number BR250x250x100. Ensure safe reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 450x250x100 mm. Standard. Product number BR450x250x100. Ensure safe reversing into the loading dock, protect the building walls. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 510х250х330 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRC510х250х330. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 610х250х175 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRM610х250х175. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 600х364х110 mm (external dimensions), moving. Based on rubber bumper 450x250x100 mm. Product number BRM600х364х110. Move up and down following vehicle raising and lowering as the suspension floats during the loading/unloading cycle. Has greater service life. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 465х250х165 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRSP(16)465х250х165S. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 460х250х160 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BRSP(10)460х250х160. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 500х255х205 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BS500х255х205. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Molded rubber bumpers 800х255х205 mm (external dimensions), console type. Based on rubber bumper 450x250x100 mm. Product number BS800х255х205. Ensure safe truck movement reversing into the loading dock, protect the building walls. Used when truck load bed is higher than the ramp. For mounting dimensions, please, refer to drawings.

Technical description

Size Table

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Width, m

2 800–3 600

Height, m

800–1 400

Length, m

2 030–7 648

Left base
Right base
Front support beam
Rear support beam
Central support beam
Left leg
Right leg

Straight free-standing frame (90°) for a mechanical leveler and an embedded type dock leveler with hinged lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	90

Straight free-standing frame (90°) for an embedded type dock leveler with telescopic lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	90

Angled free-standing frame (60°) for a mechanical leveler and an embedded type dock leveler with hinged lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	60 (turned to the right or to the left)

Angled free-standing frame (45°) for a mechanical leveler and an embedded type dock leveler with hinged lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	30 (turned to the right or to the left)

FEH 30 series angled free-standing frame (30°) for a mechanical leveler and an embedded type dock leveler with hinged lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	30

FET 45 series angled free-standing frame (45°) for an embedded type dock leveler with telescopic lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Hh, mm Leveler height	any
Lh, mm Leveler length (overall)	any
A°, Angle	45

FET 60 series angled free-standing frame (60°) for an embedded type dock leveler with telescopic lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	60

FET 30 series angled free-standing frame (30°) for an embedded type dock leveler with telescopic lip

Symbol, parameter name	Calculation formula
B, mm Width	2 800–3 600
Hf, mm Ramp height	900–1 400 (1 200 as standard)
Lh, mm Leveler length (overall)	any
Bh, mm Leveler width (overall)	any
Hh, mm Leveler height	any
A°, Angle	30

Parameter	Value	Notes
Maximum height, mm	1 400
Maximum length, mm	7 348
Minimum height, mm	800
Minimum length, mm	2 030
Width, mm	2 800–3 600
Colour	RAL 9005 (jet black), RAL 5005 (signal blue)	standard colours for frame, other colour (optional)

Carry out technical inspection and maintenance of the frame regularly to provide its safe and smooth operation.

In winter remove excess snow buildup from on top of the frame and dock leveler. Clean the surrounding territory of the warehouse to ensure correct positioning of trailers.

Speed of a parking trailer should be minimum, not more than 1 km/h (30 sm/sec).

Do not drive over the frame bases with forklifts and other lifting equipment. Drive only on the leveler deck and frame triangle.

Attention! Check bumpers for signs of wear and tear regularly. Should bumper residual thickness comprise less than 50 mm or there is no bumper material at all stop using the frame until new bumper material is installed.

Packing in cardboard	Packaging features
Length, mm	base (depends on leveler length) — 2 000–4 500; legs — 2 800–3 600; triangles — 2 800–3 600
Width, mm	base — 785 (max); legs — 300; triangles — 3 400
Height, mm	base — 800 (max); legs — 550 (max); triangles — 200
Contents	bases, legs, triangles, a box with hardware

Additional Information print

All the DoorHan products are loaded with hydraulic crane or fork-lift truck with 2 m long forks. Customer or installer is recommended to use similar equipment. When lifting with crane or other lifting device use slings of corresponding lifting capacity.

Installation

Mounting Options

Mounting on steel embedded plates. This is a preferable type of installation including embedment of steel plates (400 х 400 mm) in particular places of a concrete base during preparation of installation site for a dock house.

Mounting on concrete base (with anchor bolts). This type of installation is used when steel plates were not embedded during concrete base pouring.

Warranty print

DoorHan warrants the frame to operate properly for a period of 1 year from purchase date for retail orders and for 2 years from purchase date for dealer orders.