Stahl-Rolltor RHS117 mit Rohrmotor | Maximaler Einbruchschutz

Stahl-Rolltore RHS117/08 & RHS117P/08: Maximale Sicherheit mit integriertem Antrieb

Unsere einwandigen Rolltore aus den Stahlprofilen RHS117/08 und RHS117P/08 sind die erste Wahl für Öffnungen, die den höchsten Grad an Einbruchschutz und Vandalismussicherheit erfordern. Gefertigt aus 0,8 mm starkem, verzinktem Stahl, bieten diese Tore eine massive Barriere und eine extreme Langlebigkeit, ideal für Tiefgaragen, Industriehallen und den Schutz von Ladenlokalen.

Je nach Anforderung an Sichtbarkeit und Belüftung bieten wir zwei Varianten dieses robusten Profils:

RHS117/08: Die vollflächig geschlossene Lamelle für maximalen Schutz und vollständigen Sichtschutz.
RHS117P/08: Die perforierte (gelochte) Variante, die hohen Schutz mit einer guten Luftzirkulation und teilweiser Transparenz kombiniert.

Ein wesentliches Merkmal dieser Serie ist der interne Elektroantrieb (Rohrmotor). Dieser leistungsstarke Antrieb ist platzsparend direkt in die Wickelwelle integriert. Dies schützt den Motor vor Witterung und Vandalismus und ermöglicht eine sehr kompakte Bauweise des gesamten Torsystems, da kein seitlicher Platz für einen Aufsteckantrieb benötigt wird.

Die Vorteile im Überblick:

Überlegener Einbruchschutz: Massiver 0,8-mm-Stahl widersteht auch hohen Gewalteinwirkungen.
Integrierter Rohrmotor: Kompakt, geschützt und leistungsstark, ideal für eine saubere Optik.
Extreme Langlebigkeit: Hochwertig verzinkter Stahl sorgt für dauerhaften Korrosionsschutz.
Zwei Profil-Optionen: Wählen Sie zwischen geschlossen (RHS117/08) oder perforiert (RHS117P/08).

Application:

Entrance and garage openings

Retail premises

Warehouse and industrial openings

Order with installation

Design

Steel profiles

Standard colours

Additional colors

RHS117/0.8 profile

RHS117P/0.8 profile

White

Brown

Beige

Green

Blue

Burgundy

Silver

Grey

Unpainted (galvanized)

Daffodil yellow (RAL 1007)

Ivory (RAL 1015)

Saffron yellow (RAL 1017)

Gray beige (RAL 1019)

Red ruby (RAL 3004)

Deep red (RAL 3020)

Blue steel (RAL 5011)

Spruce green (RAL 6009)

Anthracite gray (RAL 7016)

Graphite gray (RAL 7035)

Brown chocolate (RAL 8017)

Gray brown (RAL 8019)

Black amber (RAL 9005)

Equipment

Standard

Optional

The blade on the shaft assembly consists of a shaft with capsules with a diameter of 102 mm, cutting a solid or perforated steel, galvanized profile with a height of 117 mm and a thickness of 0.8 mm. The canvas can be painted in any of the colors available for selection

The end profile consists of an aluminum extruded profile RA120E with a wall thickness of 2.5 mm and a bottom seal UP4

The set of guide profiles consists of two steel guides with a seal. Guide profiles can be painted in any of the available colors

Brackets are made of steel and galvanized during production

The intrashaft electric drive is supplied with a set of hardware for fastening the drive and support with bearing

Box with additional equipment

Control unit CV01 for remote control of one roller shutter or a group of roller shutters

SmartRoll control unit for remote control of internal roller shutter electric drives using DoorHan remote controls

Group control unit GC2/GC4. GC2 for controlling two drives from one switch; block GC4 - for controlling four drives

External radio receiver DHRE-1 for controlling automation from other manufacturers using the DoorHan remote control

TRANSMITTER 4 remote control for remote control of four automatic devices

TRANSMITTER 4-PRO-BLACK remote control for remote control of four automatic devices

Key switch for surface mounting SWB

Key-button SWM (metal) for sending a control command to the electric drive control unit by turning the key

Safety photocells PHOTOCELL-N, consisting of an infrared transmitter and receiver

LED signal lamp with antenna LAMP-PRO

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

from 1,000 to 5,000

Opening width, mm

from 1,000 to 6,000

Headroom, mm

from 350 (overhead mounting)

Sideroom clearance, mm

from 95 (overhead mounting)

Maximum door curtain area, sqm

Console bracket SR351
Caliper with BSR30 bearing
Adjustable capsule KPU10230
Octagonal shaft RV102
Electric drive RS230, RS300
Guide profile RG95S
End profile RA120E
Bottom seal UP4
Web profile RHS117/08, RHS117P/08
Side seal UP5

Rolling gates made of solid steel profile RHS117/08

Rolling gates made of perforated steel profile RHS117P/08

Rolling gates with a combined leaf made of solid and perforated steel profile

Parameter	Value	Notes
	Solid steel profile RHS117/08	The design has a burglary resistance class of P4-P5
Material	Galvanized steel 0.8 mm thick
Slats weight, kg/rmt	1.2
Slats weight, kg/sqm	10.25
Number of slats per 1 m of curtain height, pcs	10
Maximum door curtain width, m	6.5
Maximum door curtain area, sqm	20
	Perforated steel profile RHS117P/08	The design has a burglary resistance class of P4-P5
Material	Galvanized steel 0.8 mm thick
Slats weight, kg/rmt	1.08
Slats weight, kg/sqm	9.22
Number of slats per 1 m of curtain height, pcs	10
Maximum door curtain width, m	6.5
Maximum door curtain area, sqm	20

Correct installation and operation of rolling gates guarantees reliable and durable operation. To extend the life of your rolling gates, follow these instructions:

1. Installation of the product must be carried out strictly in accordance with the installation instructions for rolling gates and the technical documentation of the DoorHan concern.

2. Rolling gates should open smoothly, without jerking or jolting.

3. To raise and lower the door leaf, you must use only control devices designed for this purpose.

4. Partial raising or lowering of the rolling shutter leaf is not recommended, especially for large structures.

5. If a mechanical lock is used in the design, lifting the blade when the lock is closed is prohibited.

6. When using an automatic drive, follow the instructions supplied with the drive.

7. Keep children away from roller shutter control devices (buttons, remote controls).

8. Make sure that people and animals are not within the range of the roller shutter while it is opening or closing.

9. It is strictly prohibited to stand under the structure while it is in operation, as this can lead to injury.

10. Do not subject the rolling gate to impacts or interfere with its free opening and closing.

11. Make sure that there are no foreign objects in the opening while moving the roller shutter leaf, as this may lead to damage to the structure.

12. It is prohibited to install additional equipment or accessories, or to independently replace or adjust individual parts, without consulting the manufacturer. A consultation is considered to be an appeal that contains a clear description of the problem that has arisen, which can be documented.

13. In winter, in case of icing of parts of the rolling gate structure, before raising and lowering the door leaf, it is necessary to first tap the door along the contour until the parts of the structure are completely freed from ice and foreign objects, paying special attention to the condition of the junction of the bottom strip of the product with the floor (they must also be cleaned).

14. If roller shutters are used for purposes other than their intended purpose, the manufacturer is not responsible for their integrity and proper operation.

15. Diagnostics and repair of rolling gate structures should be carried out only by qualified specialists.

16. It is necessary to carry out regular maintenance of roller shutters, at least once a year.

Packing in bubble wrap	Packaging features
Description	The packaging consists of air bubble film, wrapped in 2 layers around the gate leaf, rolled into a roll, and secured with tape with the company logo
Contents	Bubble film, tape with DoorHan logo
Width, mm	500
Height, mm	500
Length, mm	from 2,100 to 6,200

Packing in wood	Packaging features
Contents	Customized wooden box
Height, mm	550
Width, mm	600
Length, mm	Depends on the length of the door components

Additional Information print

They are installed in garages and warehouse complexes, industrial facilities, and trade pavilions.

Installation

Mounting Options

Checking Dimensional Details

Overlay installation. For surface-mounted installation, labor-intensive preparation of the opening is not required. The shaft with the roller blade and the console are installed above the opening, and the guide profiles are installed on both sides of it. A closed gate completely covers the opening and is almost flush with the surface of the walls.

Built-in installation. Built-in installation allows you to place all the elements of the rolling gate in the opening

Measuring parameters for surface mounting:
H — opening height (max), mm;
B — opening width (max), mm;
h — lintel height (min), mm;
b1 and b2 — right and left lateral distances (min), mm.
To take measurements, you must use a tape measure and a building level, or electronic measuring instruments. It is recommended to measure each parameter at a minimum of three points. When measuring the opening for structures mounted in a built-in way, you should take into account the unevenness of the walls and adjust the measurements downward by 5–10 mm.
Prepared openings must meet the following requirements: openings must be rectangular in shape; the surface of the opening planes must be flat and smooth, without sagging plaster and cracks; the wall must be monolithic, without voids (concrete, metal, solid brick); if the brick is hollow, it is recommended to edge the opening with a metal corner; the internal and external planes of the walls at the junction of structures must be smooth, without protrusions and depressions; deviations of working surfaces from vertical and horizontal should not exceed 1.5 mm per meter, but not more than 5 mm, the difference in diagonals should not exceed 5 mm.

Warranty print

The buyer is provided with a performance guarantee for rolling gates produced by the DoorHan concern for two years from the date of purchase of this product.

New Products

All rolling gates are packed in an individual wooden box.