Sectional door RSD01 Hybrid Europe

Sectional door RSD01 Hybrid Europe is designed to cover small openings (width from 2,000 to 3,500 mm, height from 1,800 to 2,840 mm) in garages and technical rooms. A structure based on a low lift type can be installed in rooms with minimum distances from the opening borders to the edges of the ceiling (lintel) and walls (walls) - from 85 and 80 mm, respectively. If the borders of the opening are in contact with the ceiling and walls, the sectional door is installed using built-in mounting. The RSD01 Hybrid Europe is ideal for individual construction. Sectional door has a wide range of colors and designs. The RSD01 Hybrid Europe is completely hermetic - does not let in moisture and cold from the street, keeps the heat in the room. The design of the sectional door is durable, easy to install and will serve you for many years.

Application:

Residential garages
Residential garages

Order with installation

Design

Panel Type

Surface Type

Color Options

D-Line

S-Line

M-Line

V-Line

W-Line

Cassete

S-Line (panel inner side)

Woodgrain

Stucco (external)

Smooth (external)

Stucco (internal)

RAL 9010

RAL 9007

RAL 9006

RAL 8014

RAL 7040

RAL 7016-SG

RAL 7016-DM

RAL 7004

RAL 5005

RAL 3000

DB703

Golden oak

Satin gray

Winchester

Non-standard color according to the RAL map (extra charge)

Equipment

Standard

Optional

A door leaf made of energy-efficient sandwich panels 40 mm thick with reinforcement for internal hinges and side supports.

Side tracks and vertical anglesl have increased strength and all the necessary perforation.

Galvanized extension springs (spring-in-spring system). The number of cycles of the balancing mechanism is at least 25,000.

Box with mounting kit, mounting instructions and product technical drawings.

Acrylic window 588 x 181, black, industrial. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Black edging.

Acrylic window 638 x 334, black, industrial. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Black edging.

Acrylic window 455 x 295, white. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. White edging.

Acrylic window 455 x 295, black. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Black edging.

Acrylic window 455 x 295, brown. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Brown edging.

Acrylic window 455 x 295, golden oak. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Wood trim golden oak.

Acrylic window 455 x 295, dark oak. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Dark oak wood edging.

Acrylic window 455 x 295, white with cross layout. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Stylistic insert in the form of a cross. White edging.

Acrylic window 490 x 324, white Milk-Glass. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. White edging.

Acrylic window 490 x 324, black Milk-Glass. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Black edging.

Acrylic window 532 x 344, dark oak Milk-Glass. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Dark oak edging.

Acrylic window 532 x 344, golden oak Milk-Glass. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Golden oak edging.

Acrylic window 532 x 344, brown Milk-Glass. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Brown edging.

Acrylic window 532 x 344, silver. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Silver edging.

Stainless steel window 230 x 230. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss.

The window is made of stainless steel 310 x 310. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss.

Window acrylic round D=330 mm, black. The special design provides a snug fit to the door leaf, which protects it from freezing and heat loss. Black edging.

A mechanical lock allows you to block the door leaf in the closed position - both from the inside of the room and from the street.

The new ergonomically shaped handle is an elegant decorative addition to the design of the door leaf.

Panoramic panels made of aluminum profiles.

Panoramic panels made of T-bridge aluminum profiles (optional) with a polyamide thermal insert increase the energy efficiency of the door and prevent the profiles from freezing.

Technical description

Size Table

Opening Dimensions

Construction

Standard Construction

Specifications

Operating Conditions

Packaging

Parameters

Value

Opening height, mm

from 1 800 to 2 840

Opening width, mm

from 2,000 to 3,500

Headroom, mm

85 minimum

Sideroom clearance, mm

80 minimum

Lintel profile with double-chamber top seal
Double-chamber side seals
Hidden bottom profile and bottom seal
Top corner bracket adjustable
Side support with adjustable roller holder
Bottom corner bracket
Inner loop
Vertical guide assembly
Horizontal guide assembly
Distance C-profile
Sandwich panel
Double pulley bracket
L-shaped ceiling mount bracket mounted on a random fixation bracket
Side cover

Low lift (tension springs)

Symbol, parameter name	Calculation formula
H, mm Opening height	H
h, mm Headroom height	h ≥ 85; (h ≥ 115 when using ceiling drive)
B, mm Opening width	B
A, mm Angle track height	H + 50
A1, mm Vertical track height	А - 623
E, mm Horizontal track length	at H<2030 - 2170, at H<2150 - 2664, at H<2280 - 2794, at H<2470 - 2984, at H<2530 - 3044, at H<2680 - 3194, at H<2840 - 3354, at H<3080 - 3594
S, mm Minimum side room clearance	80

Parameter	Value	Notes
Wind load resistance, Pa, class (EN 12424)	Shield entirely from sandwich panels - 1,270 (5); Shield containing no more than 2 panoramic panels / shield containing no more than 1 panel with a window - 1,000 (4); Shield containing no more than 3 panoramic panels / shield containing no more than 2 panels with a window - 700 (3); Shield containing no more than 4 panoramic panels / shield containing no more than 3 panels with a window - 450 (2); Panel containing more than 4 panoramic panels / Panel containing more than 3 panels with a window - 300 (1)
Volumetric air permeability, m³/m²*h, class (EN 12426)	At pressure +50 Pa < 12 (2) At vacuum -50 Pa < 12 (2)
Water resistance limit - minutes, class (EN12425)	At a pressure of +50 Pa - 25 (2) At a pressure of +200 Pa - 35 (3)
Manual opening and closing force, N, no more than (EN 12604)	150
Reliability, number of opening-closing cycles, not less than (EN 12604)	20 000
Heat transfer coefficient, W/(m² *K), (CSN 73 0540-2)	1,2
Door leaf weight, kg/m²	11,6	The exact value depends on the size of the panels used in the door construction.

1. Sections of the door leaf must move smoothly along the rails, and the door itself must be balanced, i.e. their weight must be compensated by tension springs.

2. Manual opening and closing of the sectional door is carried out only with the handle.

3. When manually opening and closing the sectional door, do not put much force on it. Sharp jerks are prohibited.

4. Make sure that people and animals are not in the range of the sectional door during its operation.

5. It is strictly forbidden to move under the moving door leaf, as this may cause injury.

6. Don’t strike the door leaf or obstruct its movement.

7. Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door opener (if used).

8. Make sure that there are no foreign objects and debris in the opening while the blade is moving. Their presence can lead to distortion and jamming of the door leaf.

Packing in wood	Packaging features
Description	The guiding system and the sectional door panel are packed in a rigid combination of wood and cardboard; all packages are provided with information stickers containing order data, as well as the company logo
Contents	Wooden beam, cardboard
Width, mm	400
Height, mm	820
Length, mm	From 2200 to 3700
Gross weight, kg	Up to 100
Number of items in the packaging	Shield packaging - from 3 to 5 panels; packing of guides - 1 guide system; packing of a complete set — 1 box with a complete set

Packing in cardboard box	Packaging features
Description	The assembly kit is packed in a corrugated cardboard box;
Contents	Three-layer white cardboard, DoorHan logo, adhesive tape
Width, mm	130
Height, mm	85
Length, mm	850
Gross weight, kg	up to 33

Additional Information print

It is recommended to store sandwich panels in their original packaging on a flat surface. It is recommended to store packages with sandwich panels for no more than 6 months from the date of production in closed warehouses or under a canopy. Panels must be protected from moisture, and in winter - from snow and pollution. Protect them from direct sunlight, precipitation and dust. Packages must be stored in a horizontal position.

Installation

Mounting Options

Checking Dimensional Details

On the wall mounting (classic type of mounting): the rail system is mounted on the walls and lintel from the inside of the opening.

Embedded mounting (in the absence of pre-walls). The bearing casing is installed end-to-end on the opening. A guide system is mounted on it. The system of adjustable brackets allows you to level the unevenness of the walls.

Embedded installation with an overlap (in the absence of pre-walls). The bearing casing is installed on the opening with an overlap (20 mm). A guide system is mounted on it. The system of adjustable brackets allows you to level the unevenness of the walls.

All opening measurements are taken from the inside with a help of meter and level. Every dimension should be taken at least in three points:
H — opening height (distance from floor to opening top).
B — opening width (distance between left and right side of the opening).
h — headroom (distance between opening top and ceiling) min 85 mm.
b1/ b2 — left/right sideroom (distance between opening edge and side wall) min 80 mm;
L — depth of garage.
When measuring H and B, the largest value is taken as the final size.
When measuring h, b1, b2 and L, the smallest value is taken as the final size.
Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and side rooms is straight and in level. Door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.

Warranty print

The buyer is provided with a 1-year warranty for doors manufactured by the DoorHan.

New Products

The redesigned top bracket has increased strength characteristics, larger position adjustment slots, and a positioning stop, making it securely and correctly fixed to the panel.

For ease of installation, the spacer sleeves are mounted on the roller axis, without dismantling the roller holder.

C-profile mounting bracket with positioning stop and adjustment slots - simplifies installation and eliminates errors.