Catalog
Catalog

ISD01 Industrial Sectional Doors

ISD01 industrial sectional doors are designed for industrial buildings, warehouses, production workshops, transport terminals and a variety of industrial premises, where they have to meet stricter requirements if compared with garage sectional doors. Sealing system provides thermal efficiency, maintain temperature requirements. The door leaf is balanced with a torsion spring mechanism.
Application:
  • Warehouse facilities
  • Production workshops
Advantages
Wide range of designs and colors
Sandwich panels with interrupted thermal bridge
Shock resistant panoramic sections without extra charge
Short delivery times
Wide range of designs and colors
Sandwich panels with interrupted thermal bridge
Shock resistant panoramic sections without extra charge
Short delivery times
Design
Panel Type
Surface Type
Colour Options
D-line
D-line
S-line
S-line
M-line
M-line
V-line
V-line
W-line
W-line
Cassette
Cassette
Woodgrain
Woodgrain
Stucco
Stucco
Smooth
Smooth
RAL 9003 Signal white
RAL 9003 Signal white
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 7004 Signal grey
RAL 7004 Signal grey
RAL 1014 Ivory
RAL 1014 Ivory
RAL 6005 Moss green
RAL 6005 Moss green
RAL 5005 Signal blue
RAL 5005 Signal blue
RAL 7016 Anthracite grey
RAL 7016 Anthracite grey
RAL 3000 Flame red
RAL 3000 Flame red
RAL 3005 Wine red
RAL 3005 Wine red
RAL 8017 Chocolate brown
RAL 8017 Chocolate brown
RAL 8014 Sepia brown
RAL 8014 Sepia brown
Custom colour (extra charge)
Custom colour (extra charge)
Equipment
Standard
Optional
Door leaf of 40 mm energy-efficient sandwich panels with reinforcement for hinges and side supports.

Door leaf of 40 mm energy-efficient sandwich panels with reinforcement for hinges and side supports.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

High-quality durable torsion springs designed for 25 000 operating cycles provide effortless closing and opening of the door.

High-quality durable torsion springs designed for 25 000 operating cycles provide effortless closing and opening of the door.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by blocking itself to the track in case of cable failure.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by blocking itself to the track in case of cable failure.

A set of mounting hardware, instruction manual and product technical data.

A set of mounting hardware, instruction manual and product technical data.

Catch lock blocks the door leaf from inside the premises. Simple and reliable.

Catch lock blocks the door leaf from inside the premises. Simple and reliable.

Special window design (627 × 327 or 607 × 202 mm) guarantees tight fitting in the door leaf preventing temperature loss. Black framing.

Special window design (627 × 327 or 607 × 202 mm) guarantees tight fitting in the door leaf preventing temperature loss. Black framing.

Double sided lock blocks the door leaf from inside and outside.

Double sided lock blocks the door leaf from inside and outside.

Pass door has improved construction, enhanced durability and aesthetic appearance.

Pass door has improved construction, enhanced durability and aesthetic appearance.

Industrial doors can be equipped with operators and safety devices.

Industrial doors can be equipped with operators and safety devices.

Manual chain hoist can be installed with any lift type industrial sectional door and is used for manual opening/closing of the door.

Manual chain hoist can be installed with any lift type industrial sectional door and is used for manual opening/closing of the door.

Torsion spring mechanism has a lifetime of 25 000 cycles (possible to increase up to 100 000).

Torsion spring mechanism has a lifetime of 25 000 cycles (possible to increase up to 100 000).

Industrial handle.

Industrial handle.

Handle.

Handle.

Technical description
Size Table
Opening Dimensions
Construction
Standard Construction
Specifications
Operating Conditions
Packaging
Parameters
Value
Opening height, mm
2 000–6 120
Opening width, mm
2 000–8 000
Headroom, mm
from 150
Sideroom clearance, mm
from 120
  1. Vertical track
  2. Vertical angle
  3. Cylindrical shaft
  4. Spring safety device
  5. Drum
  6. U-shaped bracket
  7. Torsion spring)
  8. Steel coupler
  9. Internal support bracket
  10. Top support with roller holder
  11. Side support with roller holder
  12. Omega profile
  13. Cable break safety device
  14. Sandwich panel
  15. Hinge
  16. Bottom profile and seal
  17. Side seal
  18. Top profile
  19. Top seal
  20. Perforated side cap
  21. Spring bumper
  22. Universal mounting bracket for horizontal tracks

Low lift, front drum

Low lift, front drum

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height ≥ 230
B, mm Opening width B
A, mm Angle track height H + 110
Ab, mm Height of shaft axle and drum ≥ A + 59
A1, mm Vertical track height А - 543
A2, mm Horizontal track height А - 106
E, mm Horizontal track length Н + 300
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
P, mm Door opener position Н + 1 185
n, mm Clear opening H-250 mm (without operator) H-200 mm (with operator)

Low lift, rear drum

Low lift, rear drum

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 150 mm; H≤3 700
B, mm Opening width B
A, mm Angle track height if h < 170: H + 110; if 150 ≤ h ≤ 170: H + h - 60
Ab, mm Height of shaft axle and drum if h ≤ 170: H + 55; if 150 ≤ h ≤ 170: H + h - 47
A1, mm Vertical track height А - 543
A2, mm Horizontal track height А - 106
E, mm Horizontal track length Н + 510
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
P, mm Door opener position Н + 1 185
n, mm Clear opening H- 200 (with operator); H-200 (without operator)
Roof pitch

Roof pitch

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 500 mm
B, mm Opening width B
A, mm Angle track height H + 250...985
Ab, mm Height of shaft axle and drum А + 86/97
A1, mm Vertical track height Н - 300
E, mm Horizontal track length depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
α° Angle of the tracks to horizontal 5...65 (divisible by 5°)
Q, mm Shaft opener position 300
High lift

High lift

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height > 660 mm
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level by default h - 330
A, mm Angle track height H + HL
Ab, mm Height of shaft axle and drum A + 86/97
A1, mm Vertical track height А - 580
A2, mm Horizontal track height А - 53
E, mm Horizontal track length H - НL + 470...600
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
Q, mm Shaft opener position 300
High lift, low level drums

High lift, low level drums

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height ≥1 500
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level 1 330 ≤ HL ≤ h - 150
A, mm Angle track height H + HL
Ab, mm Height of shaft axle and drum H + 400...600 + 280
A1, mm Vertical track height А - 580
A2, mm Horizontal track height А - 53
E, mm Horizontal track length H - НL + 470...600
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance ≥ 500
Q, mm Shaft opener position ≥ 500
High lift inclined

High lift inclined

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 660 mm
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level 330
A, mm Angle track height H + HL + 15...749
Ab, mm Height of shaft axle and drum ≤ А + 86/97
A1, mm Vertical track height Н + HL - 330...580
E, mm Horizontal track length depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
α° Angle of the tracks to horizontal 5...65 (divisible by 5°)
Q, mm Shaft opener position 300
High lift inclined/ low level drums

High lift inclined/ low level drums

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height ≥ 1 500
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level ≥ 1 330
A, mm Angle track height H + HL + 15...749
Ab, mm Height of shaft axle and drum > H + 680
A1, mm Vertical track height Н + HL - 330...580
E, mm Horizontal track length depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 500 mm
α° Angle of the tracks to horizontal 5...65 (divisible by 5°)
Q, mm Shaft opener position ≥ 650
Vertical lift

Vertical lift

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height > Н + 350 mm
B, mm Opening width B
A, mm Angle track height 2H + 120
Ab, mm Height of shaft axle and drum A + 166
A1, mm Vertical track height Н
S, mm Minimum side room clearance 120
Q, mm Shaft opener position 300
Vertical lift low level drums

Vertical lift low level drums

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height > H + 120
B, mm Opening width B
A, mm Angle track height 2H + 120
Ab, mm Height of shaft axle and drum H + 680
A1, mm Vertical track height H + 850
S, mm Minimum side room clearance 500 min
Q, mm Shaft opener position ≥ 650
Standard lift

Standard lift

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 350 mm: H ≤ 3 700 420 mm: 3 700≤H≤5000 550 mm (spring 152)
B, mm Opening width B
A, mm Angle track height R381: H + 235; R305: H + 165
Ab, mm Height of shaft axle and drum A + 97
A1, mm Vertical track height R381: A — 580; R305: A — 490
A2, mm Horizontal track height А - 110
E, mm Horizontal track length R381: H + 200; R305: H + 250
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
P, mm Door opener position Н + 1 060
Q, mm Shaft opener position 300
Parameter Value Notes
Thermal resistance, m² · °С/W 1,13 (А) depends on door size, listed for a 3 500 × 3 000 mm door
Noise insulation, dB 24 (А)
Wind load, Pa 460 (В)
Force of manual opening and closing, N 260
Water resistance at pressure change, Pa 250
Air permeability, m³/m²*h 4,9
Number of cycles from 25 000 to 100 000
Door leaf weight, kg/m² 13,5 depends on type and size of door panels

Door leaf should smoothly slide vertically along the tracks, and be properly balanced, i. e. counterbalancing mechanism should compensate leaf weight.

For opening the door in manual operation use only the door handle.

Do not lift too much force when opening/closing the door. Prevent any sharp movements of the door.

Keep people and animals clear of opening while door is operated.

Never stay within or cross an opening with a moving door leaf as it may cause serious injury or death.

Don’t strike the door leaf or obstruct its movement.

Keep the door opening clear of any objects and litter as it may unbalance and jam the door leaf.

Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door operator (if used).

Packing in cardboard Packaging features
Description the door leaf and the tracks system are packed in a fibre board and polystyrene combination wrapped in a stretch film. Hardware is packed in a box wrapped in a stretch film. All packages are labeled with stickers containing order information and DoorHan logo
Contents corrugated fiberboard, polystyrene, stretch-film, adhesive tape
Width, mm door leaf packaging — from 500 to 800
Height, mm door leaf packaging — from 200 to 800
Length, mm door leaf packaging — from 2 100 to 8 100
Gross weight, kg up to 1 000
Number of items in the packaging leaf packaging — from 3 to 17 panels; tracks package — 1 track system; hardware — 1 box (or more); extra packages (for framing, delta-profile/struts, etc.)
Additional Information print

Sandwich panels should be stored in producer’s packaging on a flat horizontal surface in warehouses or under a canopy for a period not exceeding 6 months from the production date. Provide proper protection from water, snow, dirt, and direct sunlight.

Installation
Mounting Options
Checking Dimensional Details
Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.
Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.
  1. All the necessary measurements are taken inside the premises with just a measuring tape and a water level. Every dimension should be taken at least in three points:
  2. H — opening height (distance from the floor to the opening top);
  3. B — opening width (distance between left and right side of the opening);
  4. h — headroom (distance between opening top and ceiling) min 150 mm;
  5. b1/ b2 — left/right side room (distance between a corresponding opening edge and obstacle) min 120 mm;
  6. L — backroom.
  7. When measuring Н and В the largest figure is taken for final dimension.
  8. When measuring h, b1, b2 and L the smallest figure is taken for final dimension.
  9. Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and side rooms is level. The inside perimeter of the door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.
Warranty print

DoorHan warrants to the original purchaser of the product that the sandwich panels and steel profiles of the track system will be free from corrosion for a period of ten years.

New Products
Lightweight cylindrical shaft for outside mount on a 60 × 40 mm tube is an affordable device for sectional doors of up to 4 750 × 3 500 mm.

Lightweight cylindrical shaft for outside mount on a 60 × 40 mm tube is an affordable device for sectional doors of up to 4 750 × 3 500 mm.

Lightweight brackets system make installation of outside cylindrical shaft (bottom mount, 100 × 100 mm tube) easier, whilst being very strong and durable. Vertical angles used to mount this system made it possible to reduce the requirements for side room clearance. As there is no need to use additional fixtures when preparing the opening the weight of the system was reduced and installation time minimised.

Lightweight brackets system make installation of outside cylindrical shaft (bottom mount, 100 × 100 mm tube) easier, whilst being very strong and durable. Vertical angles used to mount this system made it possible to reduce the requirements for side room clearance. As there is no need to use additional fixtures when preparing the opening the weight of the system was reduced and installation time minimised.

Special support bracket enables installation of any DoorHan shaft opener on a shaft below outside mounting system on a 100 × 100 mm tube.

Special support bracket enables installation of any DoorHan shaft opener on a shaft below outside mounting system on a 100 × 100 mm tube.

All drums have special cable holes which make installation easier and provide proper fixation of the cable.

All drums have special cable holes which make installation easier and provide proper fixation of the cable.

New rollers have sealed bearings to prevent dust penetration and increase service life.

New rollers have sealed bearings to prevent dust penetration and increase service life.

Design
Panel Type
D-line
D-line
S-line
S-line
M-line
M-line
V-line
V-line
W-line
W-line
Cassette
Cassette
Surface Type
Woodgrain
Woodgrain
Stucco
Stucco
Smooth
Smooth
Colour Options
RAL 9003 Signal white
RAL 9003 Signal white
RAL 9006 White aluminium
RAL 9006 White aluminium
RAL 7004 Signal grey
RAL 7004 Signal grey
RAL 1014 Ivory
RAL 1014 Ivory
RAL 6005 Moss green
RAL 6005 Moss green
RAL 5005 Signal blue
RAL 5005 Signal blue
RAL 7016 Anthracite grey
RAL 7016 Anthracite grey
RAL 3000 Flame red
RAL 3000 Flame red
RAL 3005 Wine red
RAL 3005 Wine red
RAL 8017 Chocolate brown
RAL 8017 Chocolate brown
RAL 8014 Sepia brown
RAL 8014 Sepia brown
Custom colour (extra charge)
Custom colour (extra charge)
Equipment
Standard
Door leaf of 40 mm energy-efficient sandwich panels with reinforcement for hinges and side supports.

Door leaf of 40 mm energy-efficient sandwich panels with reinforcement for hinges and side supports.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

Side tracks and vertical angles made of 2 mm steel have increased strength and all the necessary perforation.

High-quality durable torsion springs designed for 25 000 operating cycles provide effortless closing and opening of the door.

High-quality durable torsion springs designed for 25 000 operating cycles provide effortless closing and opening of the door.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

Spring break safety device reliably locks the shaft in case of emergency preventing the door leaf from falling.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by blocking itself to the track in case of cable failure.

Cable break safety device is used as bottom bracket. It stops door leaf from falling by blocking itself to the track in case of cable failure.

A set of mounting hardware, instruction manual and product technical data.

A set of mounting hardware, instruction manual and product technical data.

Optional
Catch lock blocks the door leaf from inside the premises. Simple and reliable.

Catch lock blocks the door leaf from inside the premises. Simple and reliable.

Special window design (627 × 327 or 607 × 202 mm) guarantees tight fitting in the door leaf preventing temperature loss. Black framing.

Special window design (627 × 327 or 607 × 202 mm) guarantees tight fitting in the door leaf preventing temperature loss. Black framing.

Double sided lock blocks the door leaf from inside and outside.

Double sided lock blocks the door leaf from inside and outside.

Pass door has improved construction, enhanced durability and aesthetic appearance.

Pass door has improved construction, enhanced durability and aesthetic appearance.

Industrial doors can be equipped with operators and safety devices.

Industrial doors can be equipped with operators and safety devices.

Manual chain hoist can be installed with any lift type industrial sectional door and is used for manual opening/closing of the door.

Manual chain hoist can be installed with any lift type industrial sectional door and is used for manual opening/closing of the door.

Torsion spring mechanism has a lifetime of 25 000 cycles (possible to increase up to 100 000).

Torsion spring mechanism has a lifetime of 25 000 cycles (possible to increase up to 100 000).

Industrial handle.

Industrial handle.

Handle.

Handle.

Technical description
Size Table
Parameters
Value
Opening height, mm
2 000–6 120
Opening width, mm
2 000–8 000
Headroom, mm
from 150
Sideroom clearance, mm
from 120
Construction
  1. Vertical track
  2. Vertical angle
  3. Cylindrical shaft
  4. Spring safety device
  5. Drum
  6. U-shaped bracket
  7. Torsion spring)
  8. Steel coupler
  9. Internal support bracket
  10. Top support with roller holder
  11. Side support with roller holder
  12. Omega profile
  13. Cable break safety device
  14. Sandwich panel
  15. Hinge
  16. Bottom profile and seal
  17. Side seal
  18. Top profile
  19. Top seal
  20. Perforated side cap
  21. Spring bumper
  22. Universal mounting bracket for horizontal tracks
Standard Construction

Low lift, front drum

Low lift, front drum

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height ≥ 230
B, mm Opening width B
A, mm Angle track height H + 110
Ab, mm Height of shaft axle and drum ≥ A + 59
A1, mm Vertical track height А - 543
A2, mm Horizontal track height А - 106
E, mm Horizontal track length Н + 300
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
P, mm Door opener position Н + 1 185
n, mm Clear opening H-250 mm (without operator) H-200 mm (with operator)

Low lift, rear drum

Low lift, rear drum

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 150 mm; H≤3 700
B, mm Opening width B
A, mm Angle track height if h < 170: H + 110; if 150 ≤ h ≤ 170: H + h - 60
Ab, mm Height of shaft axle and drum if h ≤ 170: H + 55; if 150 ≤ h ≤ 170: H + h - 47
A1, mm Vertical track height А - 543
A2, mm Horizontal track height А - 106
E, mm Horizontal track length Н + 510
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
P, mm Door opener position Н + 1 185
n, mm Clear opening H- 200 (with operator); H-200 (without operator)
Roof pitch

Roof pitch

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 500 mm
B, mm Opening width B
A, mm Angle track height H + 250...985
Ab, mm Height of shaft axle and drum А + 86/97
A1, mm Vertical track height Н - 300
E, mm Horizontal track length depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
α° Angle of the tracks to horizontal 5...65 (divisible by 5°)
Q, mm Shaft opener position 300
High lift

High lift

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height > 660 mm
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level by default h - 330
A, mm Angle track height H + HL
Ab, mm Height of shaft axle and drum A + 86/97
A1, mm Vertical track height А - 580
A2, mm Horizontal track height А - 53
E, mm Horizontal track length H - НL + 470...600
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
Q, mm Shaft opener position 300
High lift, low level drums

High lift, low level drums

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height ≥1 500
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level 1 330 ≤ HL ≤ h - 150
A, mm Angle track height H + HL
Ab, mm Height of shaft axle and drum H + 400...600 + 280
A1, mm Vertical track height А - 580
A2, mm Horizontal track height А - 53
E, mm Horizontal track length H - НL + 470...600
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance ≥ 500
Q, mm Shaft opener position ≥ 500
High lift inclined

High lift inclined

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 660 mm
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level 330
A, mm Angle track height H + HL + 15...749
Ab, mm Height of shaft axle and drum ≤ А + 86/97
A1, mm Vertical track height Н + HL - 330...580
E, mm Horizontal track length depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
α° Angle of the tracks to horizontal 5...65 (divisible by 5°)
Q, mm Shaft opener position 300
High lift inclined/ low level drums

High lift inclined/ low level drums

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height ≥ 1 500
B, mm Opening width B
HL, mm Distance from opening to horizontal tracks level ≥ 1 330
A, mm Angle track height H + HL + 15...749
Ab, mm Height of shaft axle and drum > H + 680
A1, mm Vertical track height Н + HL - 330...580
E, mm Horizontal track length depends on α° (dimension that limits door backroom operation space)
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 500 mm
α° Angle of the tracks to horizontal 5...65 (divisible by 5°)
Q, mm Shaft opener position ≥ 650
Vertical lift

Vertical lift

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height > Н + 350 mm
B, mm Opening width B
A, mm Angle track height 2H + 120
Ab, mm Height of shaft axle and drum A + 166
A1, mm Vertical track height Н
S, mm Minimum side room clearance 120
Q, mm Shaft opener position 300
Vertical lift low level drums

Vertical lift low level drums

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height > H + 120
B, mm Opening width B
A, mm Angle track height 2H + 120
Ab, mm Height of shaft axle and drum H + 680
A1, mm Vertical track height H + 850
S, mm Minimum side room clearance 500 min
Q, mm Shaft opener position ≥ 650
Standard lift

Standard lift

Symbol, parameter name Calculation formula
H, mm Opening height H
h, mm Headroom height 350 mm: H ≤ 3 700 420 mm: 3 700≤H≤5000 550 mm (spring 152)
B, mm Opening width B
A, mm Angle track height R381: H + 235; R305: H + 165
Ab, mm Height of shaft axle and drum A + 97
A1, mm Vertical track height R381: A — 580; R305: A — 490
A2, mm Horizontal track height А - 110
E, mm Horizontal track length R381: H + 200; R305: H + 250
Db, mm Torsion spring operation space depends on opening dimensions and door leaf weight
S, mm Minimum side room clearance 120
P, mm Door opener position Н + 1 060
Q, mm Shaft opener position 300
Specifications
Parameter Value Notes
Thermal resistance, m² · °С/W 1,13 (А) depends on door size, listed for a 3 500 × 3 000 mm door
Noise insulation, dB 24 (А)
Wind load, Pa 460 (В)
Force of manual opening and closing, N 260
Water resistance at pressure change, Pa 250
Air permeability, m³/m²*h 4,9
Number of cycles from 25 000 to 100 000
Door leaf weight, kg/m² 13,5 depends on type and size of door panels
Operating Conditions

Door leaf should smoothly slide vertically along the tracks, and be properly balanced, i. e. counterbalancing mechanism should compensate leaf weight.

For opening the door in manual operation use only the door handle.

Do not lift too much force when opening/closing the door. Prevent any sharp movements of the door.

Keep people and animals clear of opening while door is operated.

Never stay within or cross an opening with a moving door leaf as it may cause serious injury or death.

Don’t strike the door leaf or obstruct its movement.

Keep the door opening clear of any objects and litter as it may unbalance and jam the door leaf.

Keep tracks and rollers clean, as dirt may prevent the door from smooth movement and cause overloading and damage of the door operator (if used).

Packaging
Packing in cardboard Packaging features
Description the door leaf and the tracks system are packed in a fibre board and polystyrene combination wrapped in a stretch film. Hardware is packed in a box wrapped in a stretch film. All packages are labeled with stickers containing order information and DoorHan logo
Contents corrugated fiberboard, polystyrene, stretch-film, adhesive tape
Width, mm door leaf packaging — from 500 to 800
Height, mm door leaf packaging — from 200 to 800
Length, mm door leaf packaging — from 2 100 to 8 100
Gross weight, kg up to 1 000
Number of items in the packaging leaf packaging — from 3 to 17 panels; tracks package — 1 track system; hardware — 1 box (or more); extra packages (for framing, delta-profile/struts, etc.)
Additional Information

Sandwich panels should be stored in producer’s packaging on a flat horizontal surface in warehouses or under a canopy for a period not exceeding 6 months from the production date. Provide proper protection from water, snow, dirt, and direct sunlight.

Installation
Mounting Options
Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.
Overhead mounting. All the tracks are mounted on the headroom and side rooms inside the premise.
Checking Dimensional Details
  1. All the necessary measurements are taken inside the premises with just a measuring tape and a water level. Every dimension should be taken at least in three points:
  2. H — opening height (distance from the floor to the opening top);
  3. B — opening width (distance between left and right side of the opening);
  4. h — headroom (distance between opening top and ceiling) min 150 mm;
  5. b1/ b2 — left/right side room (distance between a corresponding opening edge and obstacle) min 120 mm;
  6. L — backroom.
  7. When measuring Н and В the largest figure is taken for final dimension.
  8. When measuring h, b1, b2 and L the smallest figure is taken for final dimension.
  9. Difference of floor level along the opening should not exceed 10 mm. Make sure that mounting surface of headroom and side rooms is level. The inside perimeter of the door opening should be framed with metal or other solid material in case the surface is not concrete or solid enough to install tracks system.
Warranty

DoorHan warrants to the original purchaser of the product that the sandwich panels and steel profiles of the track system will be free from corrosion for a period of ten years.

Checkout
Managers of the company will answer all
questions by phone: