Drives SHAFT-50 and SHAFT-150 for industrial sectional doors

Electromechanical shaft drives SHAFT-50 and SHAFT-150 are designed for automation of industrial sectional doors with high, vertical and inclined lift types.

Application:

Fireproof sectional doors
Industrial sectional doors (any type)

Order with installation

Advantages

Easy and simple connection to the control board is ensured by removable terminals.

Internal receiver of 433 MHz carrier frequency with the ability to individually add/delete up to 60 transmitters.

Adjustable cam limit switch sets the door end positions.

LED indicators located on the control board help visually control the operator programming cycle and get information about the chosen operation logic.

Reducer chain made of high quality zinc coated steel with 12 mkm. Welded chain links provide increased reliability and durability.

Easy and simple connection to the control board is ensured by removable terminals.

Internal receiver of 433 MHz carrier frequency with the ability to individually add/delete up to 60 transmitters.

Adjustable cam limit switch sets the door end positions.

LED indicators located on the control board help visually control the operator programming cycle and get information about the chosen operation logic.

Reducer chain made of high quality zinc coated steel with 12 mkm. Welded chain links provide increased reliability and durability.

Design

OPERATOR DESIGN

High level temperature transfer of the drive

Built-in control unit

Chain reducer

Equipment

Standard

Optional

Operator, three-button control box, hardware, lock rings

PHOTOCELL-N safety photocells consisting of infrared transmitter and receiver

Wi-Fi-module for wireless control of the door operator (control signal, NO)

TRANSMITTER-2PRO-BLACK remote control operates two devices

GSM-module receives a mobile phone signal and transmits a control signal to actuate the operator or barrier

TRANSMITTER-4PRO-BLACK remote control operates four devices

TRANSMITTER-4 remote control operates four devices

TRANSMITTER-PREMIUM having steel housing can operate up to four devices

KEYPAD series code keypad controls door operator equipped with internal or external DoorHan receiver

CAR-TRANSMITTER remote control working on cigarette lighter can operate two devices

COMMAND-433 wireless button to control two devices

Turning off KEYSWITCH-N transmits a controlling signal to the control block of an automatic device

Anti-vandal code keypad Ref: KEYCODE series controls automatic devices. It can be used as an outdoor keypad or a proximity-card reader

External DHRE-1 receiver controls other manufactures’ automatic devices with DoorHan remote control

LAMP-PRO-series LED lamp with antenna to signal the door movement

Wireless photocells of PHOTOCELL-W series consisting of infrared transmitter and receiver

Sirena giving an audio warning about the door movement

Traffic-light-LED to provide safe entering and exiting of the facility

DH-SENSOR-KIT pneumatic safety edge ensuring safe operation of sectional doors

Technical description

Construction

Specifications

Operating Conditions

Packaging

Release cord
Chain
Gear motor
Control unit
Gear housing
Limit switches
Manual operation chain

Parameter	Value	Notes
Door area, sqm	25
Supply voltage, V	220-240
Torque, Nm	50
Motor, V	220
Operating temperature range, °С	-20...+55
Motor rotational speed, rev/min	1 400
IP protection class	54
Intensity of use	40

Install the door operator only on a properly balanced and lubricated door.

Make sure the door operator specifications correspond to local climatic conditions.

Never install this operator in hazardous locations.

Make sure no objects will get jammed between movable and stationary parts of the operator.

Use only DoorHan accessories to prevent door operator damage.

Never leave the door operator disengaged.

Never use the door operator if any repair or adjustment needs to be done.

Activate door only when there are no obstructions preventing door travel.

Walk or drive through the opening only when the door is fully opened and stopped. The operator must be on stop.

Never permit children to operate or play with door control push buttons or remote control transmitters.

Do not make any changes to automatics of the operator.

Packing in cardboard box	Packaging features
Contents	stretch film, polystyrene, cardboard box
Length, mm	460
Width, mm	360
Height, mm	180

Installation

Mounting Options

The operator is fitted to the shaft with a mounting bracket, a pin and a lock ring. The mounting bracket is fastened to the headroom screws.

Warranty print

DoorHan warrants the door operator to work properly for a period of 3 years from purchase date. Dealer may change the warranty period.